Jump to content

Last blind for the year....


Recommended Posts

Got platform done and 4 walls framed... now if i can just get it stood  up tomorrow  should be able to get it done..20220805_204109.thumb.jpg.d05652bbe04ce6da3fac6f3551638d8a.jpg20220805_204120.thumb.jpg.98526acc00d7a83b3f41e60d262b29cb.jpg

I did buy pt legs for this one.. just didnt have time  or energy to cut locust or larch to make  them... 

  • Like 7
Link to comment
Share on other sites

8 minutes ago, G-Man said:

Got platform done and 4 walls framed... now if i can just get it stood  up tomorrow  should be able to get it done..20220805_204109.thumb.jpg.d05652bbe04ce6da3fac6f3551638d8a.jpg20220805_204120.thumb.jpg.98526acc00d7a83b3f41e60d262b29cb.jpg

I did buy pt legs for this one.. just didnt have time  or energy to cut locust or larch to make  them... 

What were they charging for pt 4x4’s ?  Last spring, I got 8 ft landscape timber’s at Home Depot for 5.99 ea.  I had to sort thru quite a few to find straight ones.  
F62522BB-BEAA-455B-BB7F-2E307FB3D6CC.thumb.jpeg.0a27f95dac020d2deb1f5e953fb94db2.jpeg

Link to comment
Share on other sites

3 minutes ago, wolc123 said:

What were they charging for pt 4x4’s ?  Last spring, I got 8 ft landscape timber’s at Home Depot for 5.99 ea.  I had to sort thru quite a few to find straight ones.  
F62522BB-BEAA-455B-BB7F-2E307FB3D6CC.thumb.jpeg.0a27f95dac020d2deb1f5e953fb94db2.jpeg

10 ft were $14 apiece. 

Link to comment
Share on other sites

5 minutes ago, wolc123 said:

That’s not too bad.  It sounds like they down a bit from this spring’s peak.  The Fed’s recent interest rate hike must already be making an impact on high lumber prices.  

They finally took off terriff on canadian  lumber is more likely the reason.. been hauling lotnof lumber from canada  on the rails lately as well as crude oil from canada to american refineries. 

  • Like 2
Link to comment
Share on other sites

Got base up this am,at 530 to 630 before work called at 7am.. 20220806_071608.thumb.jpg.7c2e601b6d2023d4c042ae4ee82491bd.jpg20220806_073730.thumb.jpg.9f5d396b4777cb2c68c1940b8cf1a54e.jpgused a couple of stakes a chain and the little tractor kind of footed it like a ladder stand then added last two legs .  Should get rest done  when i get home from work monday and tuesday.20220806_073722.thumb.jpg.2afe7d67b2251b7615cf4b7c2ded241c.jpg

  • Like 7
Link to comment
Share on other sites

On 8/5/2022 at 9:17 PM, wolc123 said:

What were they charging for pt 4x4’s ?  Last spring, I got 8 ft landscape timber’s at Home Depot for 5.99 ea.  I had to sort thru quite a few to find straight ones.  
F62522BB-BEAA-455B-BB7F-2E307FB3D6CC.thumb.jpeg.0a27f95dac020d2deb1f5e953fb94db2.jpeg

You can tell how many years it's been there if you count the boards under the legs.

F62522BB-BEAA-455B-BB7F-2E307FB3D6CC.thumb.jpeg.0a27f95dac020d2deb1f5e953fb94db2.jpeg

Edited by Jeremy K
Link to comment
Share on other sites

2 minutes ago, Jeremy K said:

You can tell how many years it's been there if you count the rocks under the legs.

F62522BB-BEAA-455B-BB7F-2E307FB3D6CC.thumb.jpeg.0a27f95dac020d2deb1f5e953fb94db2.jpeg

Those are leveling blocks.  For optimum comfort in a stand, I like to keep the platform within half a bubble of perfectly level.  

  • Like 1
Link to comment
Share on other sites

11 hours ago, LET EM GROW said:

Building my first now. You dont use PT lumber on the blind itself?

Hoping to get walls and roof built but for now just in case I'm setting a ground blind on top.. 

No just for legs if i dont cut larch or locust. Give your roof a good 2 ft overhang all around protects the siding better than any stain. 

  • Thanks 1
Link to comment
Share on other sites

30 minutes ago, LET EM GROW said:

I was going to ask what the trick is with doing roofs. we did a couple and without a 20/30ft extension ladder they are nearly impossible it seems. especially when theres only room for one man up there..  

I have done them different ways . Easiest seems to be  build it on ground and slide it up on top ( metal roof 2x3 frame. ) then screw thru top plate to attach.  

I also will built and start to cover it and leave a sheet  out  and attach it from below like a hatch lining up ridges and capping the other sheets . Add bracing to attach it to other rafters..  

I only use metal or plastic /fiberglass panels i cant imagine  roofing it like a house with shingles

  • Like 1
Link to comment
Share on other sites

1 hour ago, G-Man said:

I have done them different ways . Easiest seems to be  build it on ground and slide it up on top ( metal roof 2x3 frame. ) then screw thru top plate to attach.  

I also will built and start to cover it and leave a sheet  out  and attach it from below like a hatch lining up ridges and capping the other sheets . Add bracing to attach it to other rafters..  

I only use metal or plastic /fiberglass panels i cant imagine  roofing it like a house with shingles

YEa thats all we have used as well, tin roofing but a softer style material basically. . Build it before raising it up. Just a pain getting it up above the unit unless you have heavy equipment or room for the ladder up there it seems lol. The more

Link to comment
Share on other sites

  • 2 months later...
12 hours ago, New York Hillbilly said:

Excellent looking stand G-Man. I'm trying to build my first one now for me and my 6year old grandson, and can use some information. If I can ask. Where did you find the brackets for the legs?

Thank you!

Amazon.Screenshot_20221024-060315_Chrome.thumb.jpg.01a5b5f3fb8f41d65529084a87b18ef3.jpg

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...