Jump to content

Savage Impulse rifle Upgrade


Recommended Posts

Since Savage has no plans to offer parts for the Impulse line of rifles and I wanted to have several quick change barrels for my short action Predator model, I took the initiative and hounded my mad scientist machinist friend and fellow coyote hunter to make it happen.

After shooting my Predator rifle, He bought one.

It took almost a year to get it done, but we did it and now I have 2- .243 and 1-.260 Rem quick change barrel assembly's for my rifle.

Since savage won't sell bolt heads for the rifle, we're limited to short action cartridges with a .473" rim dia.

We made a barrel nut with flats on it so it can be tightened with a big adjustable instead of a spanner wrench.

The red anodized barrel extension is the factory savage extension.

I treated the parts with gun black treatment for some protection.

The last pic is of the parts in the white.

It takes me around two minutes to change barrels.

Range and zero hold testing are underway and look very promising.

IMG_1508.thumb.JPG.4655059254485d1ba23a05287dd6f934.JPGIMG_1504.thumb.JPG.b65114c39da217e4d341ed752cbea24b.JPGIMG_1512.thumb.JPG.fbd85b1618b24a2a3df298409a499428.JPG.

IMG_1507.thumb.JPG.b5c5b70f931d710c269eabe464533095.JPGIMG_1520.thumb.JPG.210e351f6a3e8ec7b1460009ebc7f32f.JPG

 

 

 

Edited by Shoots100
  • Like 4
Link to comment
Share on other sites

  • 2 weeks later...

If you use good QD scope mounts, the rifle holds zero after changing barrels.

I swapped between .243 and .260 without much zero effect.

Here's a pic of the 50 yard target after full disassembly of the rifle and scope with the factory .243 barrel.

3 shots, disassemble, assemble and three more shots.

Last group was a hotter 38 grn load, as I just wanted to test them with the chrono.

Although the three shot group was nice, there were pressure signs.

The bull is 1-1/8" dia.

IMG_1535.thumb.JPG.e9f074994e30390aea9d37cd8c25894b.JPG

  • Like 1
Link to comment
Share on other sites

My only issue with the Impulse was it being very barrel heavy.

I had the factory barrel spiral fluted and while it looked cool to me, it didn't reduce the weight as much as I wanted.

The Carbon fiber barrel solved that issue, but it's a $700 barrel.

The rifle and my wallet weigh less now.

If it was just going to be used for hunting a couple of times a year, a cheaper thinner profile barrel would be my choice.

 

 

 

Link to comment
Share on other sites

This is a 1.5" piece of foil tape I use for sighting in my thermal scopes.

That's 5 shots at 100 yards with the scope being removed between shots.

I don't keep my scope mounted on the rifle while traveling and between hunts, so I need to know it'll hold a somewhat respectable zero. 

IMG_1539.JPG

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...