Enigma
-
Posts
778 -
Joined
-
Last visited
-
Days Won
9
Content Type
Profiles
Forums
Hunting New York - NY Hunting, Deer, Bow Hunting, Fishing, Trapping, Predator News and Forums
Media Demo
Links
Calendar
Store
Posts posted by Enigma
-
-
2 hours ago, luberhill said:
I’m shooting 100 grain Winchester power points
It broke her shoulder , hole where it broke thru the ribs was the size of a quarter .. it took the top of her heart off .
Exiting hole quarter size busted thru the ribs
About 60
Fwiw I've killed many NY deer with the .243. Always 100 grain or the Barnes 85 in copper. Sounds typical to my experiences. Always felt the .243 was adequate but moved up to the .308 and don't have the drama anymore. No fuss when I cut one loose.
Keep up the good work. Don't let the bad days get you down and always remember, HIT. THEM. HARD. Those deer have a will to live that you and I can only dream about.
Keep at it.
-
2
-
-
Yep. My favorite excuse I hear is "It was the only shot I had". No dipshit, you could've waited, not shot, not set yourself up for all the drama and extra work, and shot that same deer from the same stand 48hrs later. If you were patient and had some self control.
Takes a lot of experience to get to that point though. Antlers make people stupid.
-
3
-
-
What .243 load are you shooting?
-
Buck up and start getting a killer instinct. You need to be a steely eyed killer. Hunting deer ain't no game.
Pound them and break a shoulder, or two. Get two holes in them if you can.
Poor shots are a part of the business when you start but you need to learn to minimize those situations and possibilities as your experience grows.
Ask yourself what you have to do to change the outcome. Do you want to keep f'in around crawling on your hands and knees for hours looking for blood? Or do you want to pull the trigger and see them die within sight? The choice is your's.
-
Last couple years my PA hunting buddy and I have hunted the Charles E. Baker State Forest during the MZ holiday hunt (Madison County, WMU 7M.) Tags are easy to get and it's 9,400 acres lol. Lots of different forest types and quite a few ag fields butting up to it. Also has 100 miles of horse trails throughout so you're not always pounding through the brush. Can also ride the forest roads and if you cut a fresh track (snow depending) you can make a plan and get on it. Most fun I've had deer hunting in a long time IMHO. PM me for more info if interested.
-
1
-
-
I've been on the road camping the last month. The last two places I've stayed I've heard grouse drumming nearby in the woods from sun up till noon. It's not just your turkeys lol. Odd for sure.
-
So if it's plastic, what kind of contraption is it? What even comes close to looking like that on any piece of any outdoor equipment you've ever seen? Ag/atv/utv?
Nothing.
Low quality pic of a bird's wing.
-
6 hours ago, Northcountryman said:
Mind if I ask who you used for a Guide ?
See the board in the first pic. Captain Jason is a stand up guy. See his fb page for more info.
-
1
-
-
I'd booked a third day with a different captain. Had planned on taking out one of my sons but they both ghosted me haha. So I called up my friend @Swamp_bucks and we got his son out on the lake for the first time. The fish didn't cooperate but he had a good time. Mission accomplished.
-
3
-
-
2 hours ago, Northcountryman said:
Nice! What were you guys using for the Walleyes?
Trolling worm harnesses on the bottom.
-
1
-
-
My friend Eric lives to fish. Booked a couple days on Oneida Lake for us and had a great time.
-
6
-
-
Have us a good time
-
Would have been even more funny if the taser got pulled out.
-
1
-
-
If you can do the full 11 min.
-
-
And a side note . . .
Some might wonder why I'm posting this story. It's a hunting and fishing site after all.
Point being I divorced my wife when my boys were 8 and 10 yrs old. Turns out she liked the neighbor's Italian sausage more than my German bratwurst. I fought for custody but the legal cards are stacked against fathers and I didn't get to spend a lot of time with my sons when they were growing up. The prime time to introduce them to the outdoors was limited for me and with all their other sports interests teaching them to hunt didn't happen. We do some fishing when we can but they're both busy now with their lives becoming strong young men. No regrets.
But we always try to find common ground and for my youngest and I its motorcycles. I hope this puts these posts in perspective.
-
3
-
-
I've made many test rides on this bike and she runs like a scalded dog. At mid to high rpms she pulls hard for a 440cc bike and scoots right along. The one problem that's giving me fits is the left cylinder plug is always carbonized and running "fat" while the right side plug is whitish and running lean. I've had the carbs apart more times than I can count and cleaned them many times over. They're clean. But no amount of tuning the carbs cures the condition.
While tuning her up I've always noticed the right side exhaust has a lot more forceful output than the left. Went outside today to look her over and the oil was low. Then it dawned on me. The left cylinder rings are shot. Need to do a compression test and most likely another tear done to replace piston rings.
Don't tell my son lol.
-
1
-
-
On these old bikes you have to sync or balance the carbs so each cylinder is getting the same amount of gas and air. These carbs happen to be Keihin CV36 or "constant velocity" (air flow) carbs. Various companies sell sets of manometer gauges to sync the carbs but I try to be resourceful so I built my own setup. It worked quite well but revealed another issue I have to deal with.
-
The front forks were harsh. Had no interest in tearing apart the front end to rebuild the forks. Settled on draining the fluid and replacing it. Had to build a tool to get the oil down in the bottom through a very small hole in the top of the forks. A syringe, 1/4" tubing and some electrical shrink tubing. Worked like a charm. Added 150cc 5w20, reinstalled the air plugs and charged them each with exactly 9lbs of air. Much better ride now.
-
Changed the oil, reset the idle mixture screws and idle adjustment and she snapped right back to life! My son had come home in late May and was really jonesing to ride "his" bike. We've made several trips to a local parking lot, got him out on a couple back roads with no traffic and he seems to be catching on quick. Having a blast he said.
Funny how most kids today have no concept of a manual transmission. He's never had the opportunity to learn like I did back in the day. Clutching, shifting, rpms and throttle control. All new to him. But he's getting it. Just be smooth and take it slow I repeatedly tell him.
Also signed him up for a riding course 'cause you know, Dad doesn't know anything. I figure let someone else teach him some pointers and show him some tips. Maybe he'll learn something new.
-
3
-
-
Had to remove the exhaust to get the cylinder head off. It didn't want to come apart. There's a crossover piece underneath that was rusted really bad. Unfortunately destroyed it removing the pipes on each side. I did the math and ordered a piece of stainless tubing with an ID that was close to the OD of the stubs on the exhaust. Cut some expansion slots in it and it actually went on fairly easy. Couple of U clamps tightened it all up.
-
Installed the new front lights and speedometer and cable. They all work well.
-
Noticed it was leaking oil at the tachometer port on the cylinder head cover when I took it apart. The mounting hole for the retaing screw had broke. Cleaned it up, JB weld and it held when I put it back together. No leaks now!
-
The old cam and top cam bearings were shot so I scrounged the parts from the donor bike. Luckily they were pretty pristine so reassembly was easy. Cleaned up the top end while I was at it.
Before.
After.
.jpg.833455a1613e1de4d55e302b57b2ec76.jpg)
Public land in CNY area
in Turkey Hunting
Posted
I might be able to help you with a couple spots. Lower Herkimer county, Madison and Oneida counties. PM me for more details.