RELOADING HELP

[defrazzle]

I can use some help in reloading and trying to find a wad brand and type that will work well with my components.

The components are:

1. Hulls - Cheddite, 2 3/4", low brass, skived, smoooth outside and straight walls

2. Primer - Cheddite

3. Powder - Unique

4. Shot: - #6 - 1 1/8oz.

4. Wad - ?????

Others are using the same powder (22 grains) and hulls, but they never mention what hull they used. My older Lyman Reloading Manual (2nd ed.) has a couple of loads for Federal Champion Plastic hulls using a Rem RXP12 wad or Champion 12C2 or Alcan Type #D. But nothing for the Cheddite hull.

The only wads I have left are Winchester Western 12T for target loads. They are an orange color and have to be at least 25 years old! I did try two of these but they leave way too much between the shot and top of hull. Crimp then turns INTO the hull itself.

Any advice would be helpfu. Is there anyon that could spare 2-3 wads of the type Rem RXP12 wad, Champion 12C2 and Alcan Type #D wads for me to try? Let me know - thanks.