Any hevi shot shooters?

[MACHINIST]

Just got a email from someone about a problem they are having,here it is

 

 

 

 

 

IMPORTANT MESSAGE FROM HEVI-SHOT CEO, RALPH NAUMAN

 

At temperatures below freezing, our 12-gauge, 3-inch HEVI-Metal® and HEVI-Steel® shotshell wads may crack on ignition.  This may cause a "squib load", with an off sound and reduced power.

 

While this squib load will not damage your gun in any way, it can result in a wad stuck in your barrel, because the force of some of these shells may not be strong enough to push the wad all the way out of the muzzle.

 

The danger comes if you fire again without clearing a stuck wad from your barrel.  This can cause barrel damage or injury.   If you hear an off sound with no power, please stop shooting!  First, unload your gun -  and then check your barrel for obstructions before you fire again!

 

Please do not shoot these shotshells.   Instead, please contact us for replacement shells.  We have fixed this problem in current production.

 

After we were contacted about squib loads, we began an intensive investigation that led to an understanding of the problem by the evening of 19 November.  We want to get this notice out to our customers immediately.  Please share it with your hunting friends.

 

The wads we bought between July and mid-November used a low-density polyethylene plastic.  We switched yesterday to a linear low density polyethylene, which performs safely in all weather, including very cold weather.  To understand the difference, please go to:

 

http://www.primepolymer.co.jp/english/technology/material/pe/05.html

 

Only 12-gauge, 3-inch HEVI-Steel or HEVI-Metal® shotshells with these lot numbers may have the problem:

 

201576 - 201584        301571 - 301609        401335 - 401345        500001 - 500016

201600 - 201637        301643 - 301659        401381 - 401422

201640 - 201659        301672 - 301689        401437 - 401463

201665 - 201671        301698 - 301701        401466 - 401486

201677 - 201680        301713 - 301722        401489 - 401504

201683 - 201699        301725 - 301726        401507 - 401519

201702 - 201722        301730 - 301734

201732 - 201736       

 

The lot number is stamped on the inside top flap of your box of shotshells.

 

Our highest priories are your safety and your satisfaction with our products.  We will do everything we can to get you the product you deserve if you contact us for replacement shells.   For your safety, when you contact us we will arrange to have UPS pick up your unused shells  (please put them in a

  

shippable cardboard box such as our master carton) at no charge to you, and we will ship your replacement shells to you at no charge.  Contact Kelly Sorensen, VP of Sales and Marketing by phone:  541.367.3522, or by email:  [email protected].

  

Ralph Nauman

CEO

 

 

© 2014 ENVIRON-METAL, INC. MAKERS OF HEVI-SHOT®    P.O. BOX 779, SWEET HOME, OR 97386    541.367.3522

 

 

 

[Nasone]

Got the same email and have a batch with the numbers listed i tried to call several times and only a msg comes up to leave a msg but then says voice mail is full and to call back I will try Monday then start writing letters !!!