315hunter Posted October 23, 2012 Share Posted October 23, 2012 Hunting birds is something I have wanted to give a try. I have a Mossberg 835 with an X-Full choke for turkey hunting. Would I be able to use this gun for duck and geese? What about pheasants? Thanks for any input. Quote Link to comment Share on other sites More sharing options...
verminater71 Posted October 23, 2012 Share Posted October 23, 2012 the 835 is a great gun...I gave my nephew one and he hunts everything with it you will need to change the choke tubes...and your good to go for waterfowl...you will need steel or non toxic loads...this will require a special steel choke tube pheasants you will probably want a modified choke tube Quote Link to comment Share on other sites More sharing options...
jr.deerslayer Posted October 23, 2012 Share Posted October 23, 2012 (edited) ^^What he said Gun...yes, but you'll need a different choke. I use a lead modified choke for ducks and geese, which is equivalent to full when using steel for waterfowl. I use a extended pure gold. When I come up with some spare funds I will get a Improved cylinder(lead) to use as a modified steel choke for decoying ducks . Edited October 23, 2012 by jr.deerslayer Quote Link to comment Share on other sites More sharing options...
Elmo Posted October 23, 2012 Share Posted October 23, 2012 I used full choke on pheasants. Most were head shots which s good but one I shot in the butt. The entire back half was completely ripped off. Luckily I was able to save the breast meat. I'll be using modified choke in the future. Quote Link to comment Share on other sites More sharing options...
BaldguyLee Posted October 23, 2012 Share Posted October 23, 2012 Uh-oh, guys. I just got a Mossy 500 new w/ factory chokes. I didn't think to make sure the included choke tubes were for lead and steel both. I've fired a few rounds of steel #4 shot through the modified tube already. Am I in danger of ruining the tube or worse or is it OK ? Quote Link to comment Share on other sites More sharing options...
Elmo Posted October 23, 2012 Share Posted October 23, 2012 Uh-oh, guys. I just got a Mossy 500 new w/ factory chokes. I didn't think to make sure the included choke tubes were for lead and steel both. I've fired a few rounds of steel #4 shot through the modified tube already. Am I in danger of ruining the tube or worse or is it OK ? I use a Mossy 500 as well and I shoot strictly steel out of it. I am told that it does wear out the barrel quicker. How much? I don't know but I am just as curious of the input of the more experienced forum members. Quote Link to comment Share on other sites More sharing options...
Pygmy Posted October 23, 2012 Share Posted October 23, 2012 The standard choke tubes that come with modern shotguns are designed to be used with either lead or steel shot. I suspect you could shoot steel through them for a lifetime with no ill effects. What you should NOT do, is shoot steel through the xtra full chokes ( like turkey chokes) .Most of them have a warning printed on them to use lead shot only. Also, avoid using steel shot in older fixed choke shotguns. Many of them have thin walled barrels and can be deformed by steel shot. Most guns made after appx. 1970 were designed to shoot steel shot with no problems. Steel does pattern tighter than lead shot. In a single barrel gun I best results with IC for steel, for both ducks and geese. In my over/under I use IC/MOD. Quote Link to comment Share on other sites More sharing options...
315hunter Posted October 23, 2012 Author Share Posted October 23, 2012 appreciate the input Quote Link to comment Share on other sites More sharing options...
Dad 6424 Posted October 23, 2012 Share Posted October 23, 2012 WOW guess I need to look in to this a lot more I have been hunting every thing from turkey to crows with a xxxtra full on them stands to reason why I can kill the heck out of turkey with lead # 4 at 60 or 70 yards but cat hit the side of a barn from inside with steel shot lol Quote Link to comment Share on other sites More sharing options...
ants Posted October 23, 2012 Share Posted October 23, 2012 I have an 835. I use an extra full choke for turkey and a plain modified choke for water fowl (steel). It works great. Modified is a good all around choke, and should work well for pheasents too. Just DON'T SHOOT STEEL THROUGH THAT EXTRA FULL CHOKE Quote Link to comment Share on other sites More sharing options...
Doewhacker Posted October 23, 2012 Share Posted October 23, 2012 The standard choke tubes that come with modern shotguns are designed to be used with either lead or steel shot. I suspect you could shoot steel through them for a lifetime with no ill effects. What you should NOT do, is shoot steel through the xtra full chokes ( like turkey chokes) .Most of them have a warning printed on them to use lead shot only. Also, avoid using steel shot in older fixed choke shotguns. Many of them have thin walled barrels and can be deformed by steel shot. Most guns made after appx. 1970 were designed to shoot steel shot with no problems. Steel does pattern tighter than lead shot. In a single barrel gun I best results with IC for steel, for both ducks and geese. In my over/under I use IC/MOD. Listen to this guy he knows what he is talking about! I also use IC/Mod on the over under and my 870 I primarily use a IC, same with my other shot guns too. Sometimes a Mod choke is better for further shots at Pheasants, depends on the shooter. Quote Link to comment Share on other sites More sharing options...
Elmo Posted October 23, 2012 Share Posted October 23, 2012 Good to know. I've been missing a lot and now I know why. With steel on a full choke my pattern must be real tight. Quote Link to comment Share on other sites More sharing options...
Doewhacker Posted October 23, 2012 Share Posted October 23, 2012 Good to know. I've been missing a lot and now I know why. With steel on a full choke my pattern must be real tight. Yes that is why the Pheasants you got were missing parts..lol Quote Link to comment Share on other sites More sharing options...
Setters4life Posted October 23, 2012 Share Posted October 23, 2012 (edited) With proper 12 ga.loads, an IC choke is adequate for pheasants out to 35 yds. The pattern is still enough to prevent a bird to fly through and hit will bring it down and it will still suffice as good tablefare. You should pattern your gun with a variety of chokes and loads so you can determine how it shoots each one. Stick with #6's or #5's for pheasant and you'll be successful. Both sizes will handle a variety of situations and presentations. With a pointing dog on upland game, I'll use SKT/MOD in my 20 ga. double. It's more than enough even with light loads. I pass on those going-away shots of far-out birds because the kill area is small, and a pheasant's backside is like armor plate. Quartering and crossing shots are a different animal. Full choke is something you use for wild Kansas pheasants on a windy day when they flush wild out in front of the dogs. When you hit them with the right stuff, they come back a lot less fiesty. Edited October 24, 2012 by Setters4life Quote Link to comment Share on other sites More sharing options...
Pygmy Posted October 26, 2012 Share Posted October 26, 2012 (edited) Yes that is why the Pheasants you got were missing parts..lol Yeah, Elmo..I really can't think of any practical applications for a full choke with steel shot..For most hunting you would be much better off with an IC choke if you must shoot steel.. I personally only shoot steel when it is legally required, as when shooting ducks and geese.. For most game, lead is much more efficient. I agree with setters4life's recomendations with lead shot. He obviously has killed his share of birds and knows what he is talking about. Back when lead shot was legal for waterfowl, I killed a BUNCH of decoyed ducks including big ducks such as mallards and blacks, with an IC 2 3/4 load of 7 1/2 shot from a 12 gauge auto. That load was also deadly on pheasants out to 35 yards or so. Edited October 26, 2012 by Pygmy Quote Link to comment Share on other sites More sharing options...
TheTruth2 Posted November 7, 2012 Share Posted November 7, 2012 Jusst dont buy a remington 887 Nitromag. Supposed to be a great waterfowl gun, i hate it. Terrible. Although it put a turkey down for me. Extremely disapointed in it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.