PSE stinger peep site issue

[Al Bundy]

My bow peep site came off the string. I am searching for an image of it so I can figure where to reattach, so far no luck. Anyone have an image of theirs?? Thanks.

[Kayakwilly]

Sent from my iPhone using Tapatalk

[Kayakwilly]

Don't know if that helps if you can zoom in

Sent from my iPhone using Tapatalk

[moog5050]

My peep is 5" above my nocking point. Easy way to check. Put it in the string between 4.5 and 5" above nock. Draw and anchor with eyes closed and open eyes. You should be looking through peep if it is the right height. If not, adjust from there.

[moog5050]

You need to split string and then tie it in. I would suggest a shop if this is all foreign to you.

[Buckmaster7600]

If you take pressure of your string it will tell you where it was. If u have a bow press that is the easiest you can also use 2 screw drivers and a buddy "draw your bow have your helper put screw drivers through the holde in your cam let off slowly until the screw drivers are on your limbs."

Edited October 12, 2015 by Buckmaster7600

[Hock3y24]

Yes bow needs to be in a press to relieve pressure and split string. Then Tied in

[Buckmaster7600]

Dbl post

Edited October 12, 2015 by Buckmaster7600

[Al Bundy]

I'm heading off to bass ho shop in a few. Seems like a better idea to go there. I missed the morning anyway.