Jump to content

Wheeler Laser Bore Sighter Review

moog5050
 Share

Recommended Posts

moog5050 Mentor

moog5050

Posted
Posted (edited)

I was just packing up to sight In my 204 and 6.8 and quickly bore sighted them.  Realized I never did a review on this bore sighter but I love it.  I am always on paper at 50 and usually very close to bullseye after bore sighting with it. And if you travel you can check before and after to confirm it’s still on without firing a shot. 

it has a strong magnet on left side (back) and a laser on right (front).  Attach it to the barrel with magnet and center it on barrel. Then look through scope at 20yds and simply move cross hairs so that they are 1.5 to 2” above laser dot (or whatever your scope height is above barrel).  I think it’s much better than any other bore sighter I have tried including looking through the bore.  And it works with any caliber.  That’s the review.   I waited to find one used on eBay and it was worth whatever I paid for it.  I am usually fine tuning after 1-2 shots.  

2A824F29-EA09-45EE-82C9-51FA6AE0246C.jpeg

Edited by moog5050
  • Like 6
Link to comment
Share on other sites
moog5050 Mentor

moog5050

Posted
  • Author
Posted
24 minutes ago, rachunter said:

Wheeler makes great gear.I have the fat wrench,trigger scale and roll pin punch kit.I'm going to check this bore sight out my site lite is get old.

Yep.  I like their scope mounting and lapping kit too.  

Link to comment
Share on other sites
rachunter Experienced

rachunter

Posted
Posted
1 hour ago, moog5050 said:

I was just packing up to sight In my 204 and 6.8 and quickly bore sighted them.  Realized I never did a review on this bore sighter but I love it.  I am always on paper at 50 and usually very close to bullseye after bore sighting with it. And if you travel you can check before and after to confirm it’s still on without firing a shot. 

it has a strong magnet on left side (back) and a laser on right (front).  Attach it to the barrel with magnet and center it on barrel. Then look through scope at 20yds and simply move cross hairs so that they are 1.5 to 2” above laser dot (or whatever your scope height is above barrel).  I think it’s much better than any other bore sighter I have tried including looking through the bore.  And it works with any caliber.  That’s the review.   I waited to find one used on eBay and it was worth whatever I paid for it.  I am usually fine tuning after 1-2 shots.  

2A824F29-EA09-45EE-82C9-51FA6AE0246C.jpeg

Which one do you have ? For some reason the green laser is $50 more then the red?

Link to comment
Share on other sites
Chef Grand Master

Chef

Posted
Posted
Must be.   Mostly white oak armament components except receiver (stag) and gas tube.  

Sweet! Got any pics ? I’m curious to see what you think of that barrel they do get great reviews


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites
Chef Grand Master

Chef

Posted
Posted
WOA barrels are as advertised Chef.  Worth considering on your next build.   

Awesome! I’m thinking that will be the way to go! What did you do about getting a head spaced bolt for the barrel


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...