josephmrtn

Here is one of the fields i have a stand along the edge of.... the apple tree is in a island in the field about 50 yrds in front of my stand

http://www.wildlifetag.com/collections/wildlifetags

the only place i get it is on the back of my thigh (believe me i KNOW) anywhere else i could roll in it...

Yes he new it was older... It has Z cams on it which as far as i know they discontinued quite a few years ago... (the only manual i found that fit it was a 2001 model, also you cant get parts onling like you can for most cams... you have to order direct over the phone) Im 200% sure its a 30... for two reasons first i measured it 2nd my "correct" DL is 28.5 and the string currently comes back about an inch behind my corner of mouth... and yes it is hard to get an anchor point set up like that... lol

Copied this on AT: Adding a D-loop WILL change your anchor point. You may need to SHORTEN the bows DL a wee bit to achieve the same anchor point that you had prior to the installation. thats what i was trying to say... I told the tech i need a 28.5 DL and he said a 28 w a D loop should make it about perfect... (they dont sell 1/2 inch change modules only 1 inch)

it makes it a little longer tho.... i just worded it wrong... i know what you mean

I found/bought the correct cam modules so i will be shooting the correct DL... had to call Martin and talk w a tech and he helped me figure out what i need.... turns out I have Z Cams on my bow... that was interesting to find out... lol right now the modules on it are 5x so since i need it about 1 1/2 inch shorter he set me up w the 3x... (My DL is 28.5 and the bow is currently at 30) the 3x will make it 28 but w my D loop it should be perfect.... I hope this helps my accuracy!!! and as far as i can tell (from reading the manual and lookin at the bow) i dont need a bow press to change it either... i am flyin high!!! now all i need is to go and shoot w someone (FSW? ) and get lotsa tips

Martin Prowler, 60 lbs I was aiming at the top mark on the target and it flew over by about 1/2 inch so it shot about 5 inches high... sorry for not explaining that...

just finished buying a couple of books on amazon... we have a bunch of points to use and i figured some books by chuck adams and some of them guys will prob help me a bunch...

Easton 2216 Camo Hunters 30 1/4 inches without the head... they weigh 434.3 grains w/o head...

http://www.gandermountain.com/advice/q_id_e_40article.shtml

here is some in the Bowhunters Encyclopedia

sorry guys i googled it and read a bunch of articles and i think im finaly STARTING to "get" it...

I dont understand... my 20 yrd pin should be deadly accurite at 10 yards?????? i dont get it... the 20 yrd pin makes you aim higher therefore hitting higher.... do you understand? PM sent...

I already have 2 pins a 10 and 20.... im not sure what your saying, only have one pin? if i shoot at 20 yrds w a 10 yrd pin i clean miss.... same at 10 w a 20 yrd pin... sorry but i like being able to put the dot RIGHT ON the target and hit RIGHT where i aim... no compensating aka aiming high/low ect ect

Martin Prowler 3000 series... Yeah i just need the correct module.... hoping that he can get it for me and get it installed for less than $100

He still stops in once in a while... prob will more twards deer season

Thats what im shooting

why dangerous? you mean with other ppl? i usually would do it by myself or with one or two other guys

WOW glad he is alive... will be praying

Looks like your wrong wooly pay up... lol http://huntingny.com/forums/topic/17228-back-tagswhy/?p=219892

Redeck??? i dont get it

Sending u a PM

LMAO Im gonna shoot mine today... darn Bow Tech at Gander Mtn was supposed to call me Sat eve but didnt... im tryin to find out what it will cost to get my DL made an inch shorter so its correct for me... prob will try calling him again today

lotsa good rope... can use it for tons of stuff