Jeremy K Posted December 5, 2013 Share Posted December 5, 2013 I just looked down in my cabinet. I actually ended up buying and trying out last year the Remington corelokts and the federal fusions (180gr) and they both did not group very well out of my rifle. I think I'll try the whitetail hornady round, and also grab a box of some kind of Winchester round. I don't want to try and test a super expensive round like nosler. I can't see myself dropping 40+ dollars on a box of ammo. I could not get the remington corelokts to shoot from my 30-06 apex , i reluctantly bought a box of 40 dollar winchester ballistic tips and the rifle shoots sub MOA . Luckily i don't shoot the rifle that much because i also don't enjoy spending 40 dollars on 20 bullets. Quote Link to comment Share on other sites More sharing options...
CuseHunter Posted December 5, 2013 Author Share Posted December 5, 2013 I could not get the remington corelokts to shoot from my 30-06 apex , i reluctantly bought a box of 40 dollar winchester ballistic tips and the rifle shoots sub MOA . Luckily i don't shoot the rifle that much because i also don't enjoy spending 40 dollars on 20 bullets. yeah, I dread buying top shelf priced bullets but then again, I'm not a range going guy. I shoot good and enjoy the range but don't enjoy the tab it leaves on my credit card. I shoot only like twice a year with my guns at the range to check the zero. And get my real practice in when I get paid to shoot guns for the army. Quote Link to comment Share on other sites More sharing options...
shawnhu Posted December 5, 2013 Share Posted December 5, 2013 I've probably dropped $200+ on ammo for my new cal rifle already, and haven't even shot it once yet. Hope I find a cheap accurate bullet this rifle likes. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
dbHunterNY Posted December 5, 2013 Share Posted December 5, 2013 I've had good luck with Federal Fusion bullets and Rem Corlokts. I've used more expensive ballistic tipped ones in the past and always go back. Cheaper and they work well. I thought about trying Berger VLDs but don't want something that fragments once it's in the deer. I process my own deer is why and don't want to be picking out pieces. however, not sure what others think, but I do like 150 gr opposed to say 180 gr. for most game. I think the 180 gr punch through more, where the lighter bullets slow down upon impact more, dissipating more energy into the deer to put it down. if the bullet passes through the deer and keeps going that to me, in some way, is waisted energy. 1 Quote Link to comment Share on other sites More sharing options...
Doewhacker Posted December 5, 2013 Share Posted December 5, 2013 I process my own deer is why and don't want to be picking out pieces. . Thats interesting because that is exactly why I do not like Corlokt, the whole design of them is to rapidly shred energy once it hits game and with my case it grenaded on impact and made a mess. Quote Link to comment Share on other sites More sharing options...
Fehyd643 Posted December 5, 2013 Share Posted December 5, 2013 If your rifle produces 2" groups at 100, that's only a 6 inch group at 300, which is still well within "minute of whitetail"... Lmao. Dont know why but that absolutely made my day. Ty Quote Link to comment Share on other sites More sharing options...
Pygmy Posted December 5, 2013 Share Posted December 5, 2013 The coreloct was designed as a controlled expansion bullet. If it comes apart it it because it is being pushed at magnum velocity, faster than it was designed for.. It works fine in chamberings such as the 30-06,.308, or 7mm08. That's why belted magnums such as the .300 mags and the 7MM Mags have a reputation as meat wasters... They perform better with more stoutly constructed bullets, like the Nosler partition or accubond, or my personal favorite, the Barnes X bullets. With the Barnes, you can go to a lighter bullet, jack up the velocity, and still get nearly 100% weight retention , and they always exit, at least on broadside shots. I have never bought into the " more energy dissapated on the deer" theory...I'd rather have two holes in the animal. Quote Link to comment Share on other sites More sharing options...
Doewhacker Posted December 5, 2013 Share Posted December 5, 2013 The coreloct was designed as a controlled expansion bullet. If it comes apart it it because it is being pushed at magnum velocity, faster than it was designed for.. It works fine in chamberings such as the 30-06,.308, or 7mm08. That's why belted magnums such as the .300 mags and the 7MM Mags have a reputation as meat wasters... They perform better with more stoutly constructed bullets, like the Nosler partition or accubond, or my personal favorite, the Barnes X bullets. With the Barnes, you can go to a lighter bullet, jack up the velocity, and still get nearly 100% weight retention , and they always exit, at least on broadside shots. I have never bought into the " more energy dissapated on the deer" theory...I'd rather have two holes in the animal. Thats what I was thinking, in my case it was out of a 7mm RM. Remington now offers a bonded bullet called a "ultra" something or other and I bet thats why. Quote Link to comment Share on other sites More sharing options...
CuseHunter Posted December 5, 2013 Author Share Posted December 5, 2013 After cutting up my doe this week, I can tell you that the damage the hornady BTSP really was amazing. It didn't hold shape well as there is just channels of fragments all over the cavity. I'll be ordering a box of the Barnes TSX tipped in 168gr and shoot the box of nearly full fusions and see if they group any better than when I first bought the rifle. Quote Link to comment Share on other sites More sharing options...
Pygmy Posted December 6, 2013 Share Posted December 6, 2013 After cutting up my doe this week, I can tell you that the damage the hornady BTSP really was amazing. It didn't hold shape well as there is just channels of fragments all over the cavity. I'll be ordering a box of the Barnes TSX tipped in 168gr and shoot the box of nearly full fusions and see if they group any better than when I first bought the rifle. When Barnes bullets first became available, there were issues with copper fouling and with accuracy.. Those issues have been addressed and current bullets are MUCH better in both respects than the early ones.. I can't predict how well your rifle will group them... However, I'd bet my next month's social security check that you would be happy with thier performance on game...<<grin>>.. Quote Link to comment Share on other sites More sharing options...
dbHunterNY Posted December 9, 2013 Share Posted December 9, 2013 The coreloct was designed as a controlled expansion bullet. If it comes apart it it because it is being pushed at magnum velocity, faster than it was designed for.. It works fine in chamberings such as the 30-06,.308, or 7mm08. That's why belted magnums such as the .300 mags and the 7MM Mags have a reputation as meat wasters... They perform better with more stoutly constructed bullets, like the Nosler partition or accubond, or my personal favorite, the Barnes X bullets. With the Barnes, you can go to a lighter bullet, jack up the velocity, and still get nearly 100% weight retention , and they always exit, at least on broadside shots. I have never bought into the " more energy dissapated on the deer" theory...I'd rather have two holes in the animal. I agree with this regarding the Corelokt bullets. My experience is with a 30-06 and other standard calibers mentioned including the 270. Only magnum I have first hand experience with is a 300 win mag. Different bullets are shot out of that though. out of a 30-06 you can still punch through lower shoulder bones on both sides within reasonable hunting ranges using a 150 gr corelokt. I've done it although I highly don't recommend it, due to both shoulders being blown up with bone fragments and blood clotting, depite the short tracking job you'd have. i think two holes are better than two for tracking. that said I still think it's hard to argue the "more energy dissipated in deer" theory, it's just plain physics. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.