dinorocks Posted January 26, 2021 Share Posted January 26, 2021 I'm looking for 6 or so 9/32" screw-in field points for my Gold Tip Trad Classic arrows that are greater than 125 grain (i.e., 145 and 165 grain). The shafts I have may be too short and by increasing the weight of the point, I may be able to bring them back to center. Please let me know if you have a few to spare and I'll send some $ for points and shipping. [email protected] Quote Link to comment Share on other sites More sharing options...
Lawdwaz Posted January 26, 2021 Share Posted January 26, 2021 19 minutes ago, dinorocks said: I'm looking for 6 or so 9/32" screw-in field points for my Gold Tip Trad Classic arrows that are greater than 125 grain (i.e., 145 and 165 grain). The shafts I have may be too short and by increasing the weight of the point, I may be able to bring them back to center. Please let me know if you have a few to spare and I'll send some $ for points and shipping. [email protected] Sit tight, I may have some. Quote Link to comment Share on other sites More sharing options...
Lawdwaz Posted January 26, 2021 Share Posted January 26, 2021 (edited) I have 8 @ 145gr but they are 5/16”......gratis if you want them, shipping included. (the 4 is partially worn off the bag) Edited January 26, 2021 by Lawdwaz 1 Quote Link to comment Share on other sites More sharing options...
dinorocks Posted January 26, 2021 Author Share Posted January 26, 2021 Thanks Larry...unfortunately I don’t think they are going to fit properly. Well now that I think about it, maybe if the threading fits, it would be ok if the point is wider than the shaft (just need to test the point weight). I may have some 5/16 (100 gr). I’ll try and get back to you. Take care! Quote Link to comment Share on other sites More sharing options...
moog5050 Posted January 26, 2021 Share Posted January 26, 2021 You will be fine Dino. It will eat up your target a bit more pulling them out. But nothing major. I will see what I have too. 1 Quote Link to comment Share on other sites More sharing options...
rob-c Posted January 27, 2021 Share Posted January 27, 2021 (edited) 12 hours ago, dinorocks said: I'm looking for 6 or so 9/32" screw-in field points for my Gold Tip Trad Classic arrows that are greater than 125 grain (i.e., 145 and 165 grain). The shafts I have may be too short and by increasing the weight of the point, I may be able to bring them back to center. Please let me know if you have a few to spare and I'll send some $ for points and shipping. [email protected] Dino I have this weight system that you screw together under a field tip. They are 25 grains each so you can add 150 to your field tip weight. I bought them awhile ago and haven’t seen anything like them for some time , so I really don’t want to sell them. But I would be more than happy to let you borrow them to tune your spine. And they are 9/32 , they fit a standard diameter carbon shaft. Edited January 27, 2021 by rob-c Quote Link to comment Share on other sites More sharing options...
rob-c Posted January 27, 2021 Share Posted January 27, 2021 (edited) https://www.3riversarchery.com/brass-arrow-weight-washers.html?gclid=EAIaIQobChMIp6SS6oK77gIVK4lbCh1u_g0HEAQYBiABEgLdFfD_BwE Also check these out at 3 rivers archery. Edited January 27, 2021 by rob-c Quote Link to comment Share on other sites More sharing options...
dinorocks Posted January 27, 2021 Author Share Posted January 27, 2021 Thanks! PM sent. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.