Agreed with all the above, but one of if not the most important things to do is add a witness mark to your ram rod to assure your load / charge is seated properly every time .
Keep in mind you'll need to swab the barrel after each shot unless using BH209 powder . T7 will give you a crud ring and make it very hard to load continuous shots when sighting in with out cleaning the barrel. Pyrodex will be the same but if much more corrosive. Clean it up good after a day of sighting in.
I'm a chevy guy,but man they always have issues with rocker panels. They actually made a 3/4 ton avalanche with the big block 8.1 litre.
Looks clean from photos,best of luck and enjoy it .
Cleaning in-between shots I like a 50/50 windex water mixture then follow with a few dry patches.
Butches bore cleaner and Montana extreme products used when going into storage .
Guys these days are shooting 250yards plus with muzzleloaders especially with some high ballistic coefficients. Today's in line isn't like the muzzleloaders of years past
I didnt think Carolina was that good to be ranked 10. I was more impressed with Minnesota against Ohio State . Calling upset UCLA over LSU .
Wisconsin vs penn state another good game going on . Screw mowing the lawn...
Good bullets are hard to come by, have you tried hornady 300gr xtp
In stock
https://www.midsouthshooterssupply.com/item/0000345235/45-caliber-point452-diameter-300-grain-xtp-mag-with-cannelure-50-count
That bullet had probably killed more game then any other bullet being made. Big fan myself will work just fine in that crush rib sabot .