corydd7 Posted January 25, 2017 Share Posted January 25, 2017 Help! I'm trying to stay ahead of the curve this year and I believe I have the year planned out, however I can't find a place around Utica with ag lime . Anyone know of the best way or place to buy ag lime? I need about 6 tons so 60 lbs bags are not going to do it. Quote Link to comment Share on other sites More sharing options...
philoshop Posted January 26, 2017 Share Posted January 26, 2017 You could try asking at a local Agway, Tractor Supply, or even calling the regional DEC or Ag extension office. I'm not in your area and can't give specific recommendations. Best of luck to you. Quote Link to comment Share on other sites More sharing options...
growalot Posted January 26, 2017 Share Posted January 26, 2017 I have the same problem...to vet it delivered you have to have 10 tons delivered at once..then you have to keep it dry to spread. Also spreading it is a bit difficult without the proper equipement.. So you can stop in and ask your local farmer and see who delivers theirs. Ask if they know anyone you could hire to spread or who to rent a spreader from. Quote Link to comment Share on other sites More sharing options...
RoadKill44 Posted January 26, 2017 Share Posted January 26, 2017 I don't know if this will help anybody but this is what I extracted to figure out how much Lime I'd need for a small deer plot. I haven't tried this myself yet and if there's someone who'd like to comment (Right or Wrong) it would be appreciated. Adjusting the pH for deer food plots Soil pH In most cases soil pH of 5.5 to 7 is optimal for all seed blends designed for food plots. Soil typically tests in the acidic range one or more points below normal (IE: 4.5 pH). Typically, most suggest adding lime at 2.2 tons per acre to raise soil pH by one point. Doing the math Conversion references: 2.2 Tons = 4400 Lbs. and 1 acre = 43560 SqFt. This divides out very close to one tenth of a pound of lime for every square foot of land. So the formula you’d use to calculate how much lime is required would be: Pounds of Lime = (Desired pH – Measured pH) X 0.1 Lbs/SqFt X the Area in square feet. Using a measured pH of 4.5 for a reference and assuming your intended pH is the minimum of 5.5 pH. Lets also assume the food plot is a small 20 foot by 50 foot patch or 1000 Square feet. (5.5 – 4.5 ) X 0.1 X 1000 equals 100 pounds of lime. You would need 100 Lbs. of lime for 1000 SqFt to raise soil pH from 4.5 to 5.5 Quote Link to comment Share on other sites More sharing options...
xironman Posted January 26, 2017 Share Posted January 26, 2017 Hansons is a lime quarry in Oriskanny Falls. Cost is around $12 a ton picked up 3 Quote Link to comment Share on other sites More sharing options...
tuckersdaddy Posted January 26, 2017 Share Posted January 26, 2017 Hansons is a lime quarry in Oriskanny Falls. Cost is around $12 a ton picked upcall them because i belive they spread as well.Sent from my SM-G920V using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
corydd7 Posted January 26, 2017 Author Share Posted January 26, 2017 (edited) 5 hours ago, xironman said: Hansons is a lime quarry in Oriskanny Falls. Cost is around $12 a ton picked up Awesome exactly what I was looking for thanks to both of you! I just called they don't spread it but that's not the end of the world. Edited January 26, 2017 by corydd7 Add info Quote Link to comment Share on other sites More sharing options...
vcollaco Posted January 26, 2017 Share Posted January 26, 2017 Anyone know of a lime quarry or supplier that sells bulk lime in Binghamton/Cortland/Norwich areas? Quote Link to comment Share on other sites More sharing options...
b3h Posted January 26, 2017 Share Posted January 26, 2017 Ward and vanscoy in Owego but there has to be somewhere closerSent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
SplitG2 Posted January 26, 2017 Share Posted January 26, 2017 call Chris from NASA fertilizer. Tell him DeerAG sent you. 1-800-858-4932 1 Quote Link to comment Share on other sites More sharing options...
tuckersdaddy Posted January 27, 2017 Share Posted January 27, 2017 Anyone know of a lime quarry or supplier that sells bulk lime in Binghamton/Cortland/Norwich areas?deuryter co-op.... hope i spelled it right.Sent from my SM-G920V using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.