TeeBugg Posted November 21, 2013 Share Posted November 21, 2013 Got a cva kodiak magnum in need of some tlc. Gotta buy a breech plug, clean it real good, find some sights or a scope, find a recoil pad, and bolts to mount stock to gun. For the bolts im gonna take it to work with me and get some stainless bolts. As far as cleaning, somekne said to use dawn dishsoap? The barrel does have some rust spots on the outside, but not major. Just some light rust and pitting. I may clean it up and paint it or who knows. Whats the best way to clean the inside of the barrel? Does dawn actually work? Quote Link to comment Share on other sites More sharing options...
F-150 Posted November 21, 2013 Share Posted November 21, 2013 I use Birchwood / Casey No.77 Black Powder Solvent with my T/C Omega. That is what the dealer recommended when I purchased the gun and Bore Butter after it is clean. It takes a bit to get black powder crud out of it. plus I was told to put a primer in and fire empty before loading powder and belted bullet. Quote Link to comment Share on other sites More sharing options...
TeeBugg Posted November 21, 2013 Author Share Posted November 21, 2013 Yeah i was gonna try some barrel blaster foam but guys keep telling me to save money and do the hotwater and dish soap deal. Maybe ill try it and see how it goes. Quote Link to comment Share on other sites More sharing options...
F-150 Posted November 21, 2013 Share Posted November 21, 2013 Mine is a stainless steel barrel and the solvent is water-based formula, plus my breech plug I was told to place a small amount of grease on the threads before putting it in the breech and remove after hunting. The gun dealer told me one customer didn't remove the plug and it seized up in the breech I don't know how he ended up getting it out. The old saying an ounce of prevention is worth the pound of cure. Good Luck !!! 1 Quote Link to comment Share on other sites More sharing options...
TeeBugg Posted November 21, 2013 Author Share Posted November 21, 2013 I always used anti seize on the plug. This one was used for parts apparently lol. Shouldnt take much to fix it up though! Quote Link to comment Share on other sites More sharing options...
SteveB Posted November 21, 2013 Share Posted November 21, 2013 Depends on the type of powder that was used. Dawn works great with real black powder. A cleaner like simple green is good with most others. If really bad, use some brake cleaner to get it stripped back to bare metal. Then use a regular protectant like Rem oil or Sheath. Stay away from Bore Butter - it is a wax based inhibitor and not a preventive. Quote Link to comment Share on other sites More sharing options...
DanceswithSkunks Posted November 21, 2013 Share Posted November 21, 2013 Never ever use water to clean a rifle. You don't use it to clean centerfire rifles why would you use it to clean a blackpowder rifle. You will never get the water droplets out of the pores in the steel and it will rust. I've been using a solution called Moose Milk. It's very economical and has three components. It is equal parts of Murphy's Oil Soap, Hydrogen-peroxide, and rubbing alcohol 92% by volume. Plug up the nipple with a toothpick and fill the barrel with the solution and stand it in a bucket. It will fizzle and foam for about 30 minutes. Then empty it out and run a brass brush through the bore vigorously. Run several patches through the barrel. If it's still not clean as a whistle repeat the process. Quote Link to comment Share on other sites More sharing options...
bubba Posted November 21, 2013 Share Posted November 21, 2013 As mentioned it would depend on what was shot in it. Boiling water and dawn detergent works very well. You just need ro be sure you completely dry it after and use a good oil. For many years, blackpowder guns were cleaned with hot water as it was all they had. It does the job. I still clean my sidelock and flintlocks with water and dish deteregent. As mentioned stay away form the borebutter products. Good luck with your project 2 Quote Link to comment Share on other sites More sharing options...
TeeBugg Posted November 21, 2013 Author Share Posted November 21, 2013 Grabbed some bolts for the stock after calling cva for specs. Going to try some pb blaster or brakleen first see how that goes. I work in a parts store so i have a ton of different items at my disposal. It had triple 7 used in it before and thats what i plan to use once its finished. Quote Link to comment Share on other sites More sharing options...
WNYBuckHunter Posted November 21, 2013 Share Posted November 21, 2013 I use the CVA brand barrel blaster spray, not the foam. It works very well. I also have used Windex. After its dry, Ill run a patch through with a bit of TC No 17 natural lube, then a small amount of that on the breech plug threads. I have zero issues with rust, corrosion or sticky breech plug. Quote Link to comment Share on other sites More sharing options...
Doewhacker Posted November 21, 2013 Share Posted November 21, 2013 If need be you can attach a cleaning rod to a 1/4 inch drill and use that for some high speed scrubbing too. Quote Link to comment Share on other sites More sharing options...
moog5050 Posted November 21, 2013 Share Posted November 21, 2013 balistol Quote Link to comment Share on other sites More sharing options...
DanceswithSkunks Posted November 21, 2013 Share Posted November 21, 2013 Kroil is also an excellent product to use. It's on the expensive side though. $15 for a 16 oz spray can. Quote Link to comment Share on other sites More sharing options...
TeeBugg Posted November 22, 2013 Author Share Posted November 22, 2013 Well bolts are in, recoil pad on. Now trying to find a breech plug locally. Tried the pb blaster...did ok. Need to hit it again with the brush and some pb and i think itll be ready to shoot! Quote Link to comment Share on other sites More sharing options...
thphm Posted November 22, 2013 Share Posted November 22, 2013 Ever think of using choke and carb. cleaner, it is made to remove carbon and dirt.Watch out with brakekleen not too good for you ,breathing or spilling on your skin. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.