Jump to content

New to reloading


josephmrtn
 Share

Recommended Posts

hey guys im thinking of getting into reloading and am just wondering what you guys think of the hornady lock-n-load classic kit.... natchezss shooters supplys has it for 259.99 plus a mail in rebate for 500 free bullets from hornady, is this a good kit for a starter like me? (i no ALMOST nothing about reloading) here is the link:

http://www.natchezss.com/product.cfm?contentID=productDetail&prodID=PC085003

please check it out and tell me what you think.... also for starters im going to be reloading 270. 308. and 30-06 with possibly some 7.62x39 someday if mil surp ever goes crasy in price (like up to 20 bucks or something like that)

thanks guys!

(any tips or tricks for a newbie, besides "make SURE you only put the proper amount of powder in dont just pour it in till the shell is full" lol) BOOM!!!!!!!!

Link to comment
Share on other sites

THis is what I bought to start at the begining of the year. Love it. I am reloading 38 sp, 357, 223 Rem, 270 Win, 308 Win and 30-06 sprg,I can switch calibers in about 2 minutes. and can load pistol rounds at about 150 an hour. Pifle I load in single stage operations but I never have to adjust my dies because of the turret set up, unless i switch bullets.

http://www.midwayusa.com/product/785993/lee-4-hole-turret-press-with-auto-index-deluxe-kit

Check the reloading threads on here, there have been lots of topics on this.

Edited by Culvercreek hunt club
Link to comment
Share on other sites

http://www.midwayusa...gton?cm_vc=OBv1 Press Kit NEED

http://www.midwayusa...teel?cm_vc=OBv1 Caliper NEED

http://www.midwayusa...ler?cm_vc=sugv1 Bullet puller NEED

http://www.midwayusa...lue?cm_vc=sugv1 Reloading Tray NICE

http://www.midwayusa...iber?cm_vc=OBv1 Powder Funnel NEED

http://www.midwayusa...stud?cm_vc=OBv1 case trimmer lock stud to attach a drill NICE

http://www.midwayusa...rip?cm_vc=sugv1 case trimmer ball grip to do a few by hand NEED

http://www.midwayusa...-grain-capacity (Digital scale...very nice but not required)

http://www.midwayusa...umbler-110-volt case tumbler (not NEEDED but they sure look nice...lol) Nice

http://www.midwayusa...powder-trickler Powder trickler...again not NEEDED but makes it easier to hit exact powder amounts. NEED I think

http://www.midwayusa...gton?cm_vc=OBv1 I like these dies for a rifle becasue is give you full length sizing and neck sizing. ...for each caliber

http://www.midwayusa...ton?cm_vc=sugv1 I factory crimp everything I use. I shortens case life but increases accuracy and gives a positive bullet seat. IMO....for each rifle caliber

http://www.midwayusa...ret?cm_vc=sugv1 Turret Plate for each caliber you want to reload

http://www.midwayusa...ster?cm_vc=OBv1 Trim Guage for each caliber

Off the top of my head I can't think of anything else I got to start....of course that list always grows. I am sure I forgot something but maybe the other guys can add to the list. I tried to show what was needed and what is nice to have.

Oh forgot...brass, bullets, primers and powder....step one is read...read...then read some more before you start. It isn't hard to do it is just detailed and you shoulndn't be distracted when doing it.

Edited by Culvercreek hunt club
  • Like 1
Link to comment
Share on other sites

Wow thanks!!! Looks like I can get into the hobby for $4-$500 to start with the extras you listed, it would pay for itself rather quickly with the cost of ammo and a whole family of shooters. I bet I have spent at least that much over the last year on ammo. When I get home I will make my wish list and start aquiring supplies.

Link to comment
Share on other sites

http://www.midwayusa...gton?cm_vc=OBv1 Press Kit NEED

http://www.midwayusa...teel?cm_vc=OBv1 Caliper NEED

http://www.midwayusa...ler?cm_vc=sugv1 Bullet puller NEED

http://www.midwayusa...lue?cm_vc=sugv1 Reloading Tray NICE

http://www.midwayusa...iber?cm_vc=OBv1 Powder Funnel NEED

http://www.midwayusa...stud?cm_vc=OBv1 case trimmer lock stud to attach a drill NICE

http://www.midwayusa...rip?cm_vc=sugv1 case trimmer ball grip to do a few by hand NEED

http://www.midwayusa...-grain-capacity (Digital scale...very nice but not required)

http://www.midwayusa...umbler-110-volt case tumbler (not NEEDED but they sure look nice...lol) Nice

http://www.midwayusa...powder-trickler Powder trickler...again not NEEDED but makes it easier to hit exact powder amounts. NEED I think

http://www.midwayusa...gton?cm_vc=OBv1 I like these dies for a rifle becasue is give you full length sizing and neck sizing. ...for each caliber

http://www.midwayusa...ton?cm_vc=sugv1 I factory crimp everything I use. I shortens case life but increases accuracy and gives a positive bullet seat. IMO....for each rifle caliber

http://www.midwayusa...ret?cm_vc=sugv1 Turret Plate for each caliber you want to reload

http://www.midwayusa...ster?cm_vc=OBv1 Trim Guage for each caliber

Off the top of my head I can't think of anything else I got to start....of course that list always grows. I am sure I forgot something but maybe the other guys can add to the list. I tried to show what was needed and what is nice to have.

Oh forgot...brass, bullets, primers and powder....step one is read...read...then read some more before you start. It isn't hard to do it is just detailed and you shoulndn't be distracted when doing it.

1. comes w kit

2. have in my shop

3. buy seperate

4.included

5.included

6.buy seperate

7.buy seperate

8.included

9.buy seperate

10.included

11.included

12.buy seperate

13.buy seperate

14.buy seperate

as far as i can see this is whats included in the kit....

mostly the stuff that i dont REALLY need is not included.......... i was thinking of the rcbs kit but im cheap and want the free bullets, i already have two friends commited to buying from me.... so i very well might get it

Edited by josephmrtn
Link to comment
Share on other sites

IMO, if you are going to be reloading for other guys, and multiple calibers, the setup Culver has is light years better than the Lock and Load. Seriously, you wont regret the 500 rounds of ammo lol.

i still cant decide...... i dought i will reload over 100 rounds per yr per guy unless we buy or find some more brass, we are not big shooters just mostly hunters... (between us all this yr we used about 20 rounds of ammo, mostly me missing deer lol) any fresh opinions? i like the option of buying everything in one kit also, i dont wanna buy everything seperate... another thing if i would wanna reload more do most shooting ranges have brass that i could get for cheap or for free? also where is a good place to get powder primers ect would, gander mountain, dicks sporting goods or herb phillipsons have it? i do my shopping in watertown if that helps.....

(sorry im a noob at all this)

Link to comment
Share on other sites

The thing to consider is that with the turret style reloading machine, you never have to reset dies, etc. You install them into the plate and swap out plates (one for each caliber) as needed. Simplifies things. You can get most of what you need in a kit, then separate dies and plates for each different caliber. Its right here...

http://www.midwayusa.com/product/785993/lee-4-hole-turret-press-with-auto-index-deluxe-kit

You are still going to need dies, bases, etc for the lock and load kit as well, and the Lee setup is less money to start with.

Your decision in the end, but I personally think youd be making a mistake with the lock and load kit.

  • Like 1
Link to comment
Share on other sites

The only time you would have to adjust a die with the turret is if you change bullet type.....might fit the seating die differently....or you want to change the OAL for a specific gun. I run the 4 hole turret because I like having the full length sizing die and neck sizing die all set up. I only use one or the other depending on the gun but I don't have to add it then.

Link to comment
Share on other sites

Adjusting a die for different bullet types is pretty quick if you make up a dummy round for each bullet type. Just back off the seater, put it in the dummy round and lightly screw down the seater until you feel it touch. Should put you within a few thousanth's of the overall length on the first try.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...