Pygmy Posted December 29, 2014 Share Posted December 29, 2014 A long time hunting buddy of mine is planning a high country mule deer hunt in Colorado. He wants me to work up a long range load for his M70 .280 Rem. He's replacing his 25 year old Tasco <<CRINGE>> scope with a 2.5x 10 power Vortex, I am not sure what model. SO, I'll finally get to play with one of the Vortex scopes that so many of the posters here speak so well of. 1 Quote Link to comment Share on other sites More sharing options...
moog5050 Posted December 29, 2014 Share Posted December 29, 2014 Don't do it pygmy, you may get hooked. Do ballistics change when hunting at high altitude? Quote Link to comment Share on other sites More sharing options...
phade Posted December 29, 2014 Share Posted December 29, 2014 I have a few of the Crossfire line...their bottom one. I really like them. The ONLY complaint I have on my crossfire scope is that the adjustment knob, while fuild, requires more pressure to move - at least more than I am used to and more than I prefer. The glass itself is very nice...from the scopes to the binos. Hard to believe this stuff is china made...it's pretty good quality. There's some edge burn/clarity, but I've looked at similar priced lines (VX-1, Redfield's USA model Revolution, etc.) and there's no difference in the amount/degree. In fact, I returned a NIB VX-1 for the scope...and also the Redfield binos for the Vortex models. Moog and WNYBuckhunter have some of the higher line models. Quote Link to comment Share on other sites More sharing options...
phade Posted December 29, 2014 Share Posted December 29, 2014 Don't do it pygmy, you may get hooked. Do ballistics change when hunting at high altitude? My guess is that air density might be a factor. How much I don't know...good question and interesting one too. Quote Link to comment Share on other sites More sharing options...
moog5050 Posted December 29, 2014 Share Posted December 29, 2014 Quick google came up with this on effects of altitude on ballistics: "the ballisticard range cards dont' start adjusting for altitude until 600yrds. they say (in the case of a 308win) a rough estimate is .5 MOA for each 2000' change at 600 yrds." Assuming its correct, its not something I will have to worry about since I am not capable of shooting that far accurately, as far as I know. lol Not intended to derail thread, back to your regularly scheduled program. Quote Link to comment Share on other sites More sharing options...
wildcat junkie Posted December 29, 2014 Share Posted December 29, 2014 In theory, atmosheric pressure & humidity affect long range trajectory. Quote Link to comment Share on other sites More sharing options...
Pygmy Posted December 29, 2014 Author Share Posted December 29, 2014 I believe that a rifle tends to shoot a little flatter at high altitudes due to lower atmospheric pressure, but not enough to make a difference at the ranges that most of us shoot at. I consider 400 yards to be a long shot unless you have specialized long range gear. My own .280 , shooting 140 Nosler ballistic tips at around 3000 FPS, when sighted 4" high at 100, is 4" high at 200, 4" low at 300 and 12" low at 400. Those figures come from actually shooting groups at those ranges, not ballistic tables. That allows a "center rib cage" hold out to a little over 300 yards, and a "level with backline" hold at 400, which I consider the limit of my rifle and my ability. That is with a dead steady rest, of course. Most of the animals that I have killed at ranges from 250 to 400 yards have been shot from a prone position with a bipod or other solid rest. Quote Link to comment Share on other sites More sharing options...
BizCT Posted December 29, 2014 Share Posted December 29, 2014 (edited) I've hunted Wyoming twice around 5000ft elevation and saw no difference in any shots up to 440yds. Maybe at even longer distances it's a factor? Or maybe higher elevation like 9-10k? I sightin for 2-3" high at 100, so it's like 4" high at 200, and dead on at 300. Sent from my iPhone using Tapatalk Edited December 29, 2014 by Biz-R-OWorld Quote Link to comment Share on other sites More sharing options...
Lawdwaz Posted December 29, 2014 Share Posted December 29, 2014 The ONLY complaint I have on my crossfire scope is that the adjustment knob, while fuild, requires more pressure to move - at least more than I am used to and more than I prefer. I have a couple Leupold's that practically require vise grips. But I deal with it..........should send them back for a makeover but its no biggie.......... As far as Vortex, only Vortex product I ever looked in was a pair of their binos this fall. Top of the line something or other that was amazing! Quote Link to comment Share on other sites More sharing options...
Lawdwaz Posted December 29, 2014 Share Posted December 29, 2014 A long time hunting buddy of mine is planning a high country mule deer hunt in Colorado. He wants me to work up a long range load for his M70 .280 Rem. He's replacing his 25 year old Tasco <<CRINGE>> scope with a 2.5x 10 power Vortex, I am not sure what model. SO, I'll finally get to play with one of the Vortex scopes that so many of the posters here speak so well of. What bullet is he going with or has that not been determined yet?? Quote Link to comment Share on other sites More sharing options...
Pygmy Posted December 30, 2014 Author Share Posted December 30, 2014 Since his rifle and mine are identical , the first bullet I will try will be the 140 Nosler BT that has worked so well in my rifle... Excellent performance on game ( as long as you don't hotrod them at short range) and excellent long range form. If that doesn't work ( I expect it will) I will go from there... I worked up loads for my .280 and his .280 for our 1989 Alaska float trip. According to my notes, his rifle was a bit more accurate than mine and would tolerate a grain or two more powder before showing pressure signs.. Since we were hunting moose/caribou we were using Nosler 160 partitions for that hunt. Quote Link to comment Share on other sites More sharing options...
Dinsdale Posted December 30, 2014 Share Posted December 30, 2014 (edited) Do you even know how to change magnification on a variable scope? LOL Swarovski Claus bought me a 3-12 rail mount......you'd be scared of that 50mm objective. But look mom....no rings! Edited December 30, 2014 by Dinsdale 2 Quote Link to comment Share on other sites More sharing options...
Lawdwaz Posted December 30, 2014 Share Posted December 30, 2014 Do you even know how to change magnification on a variable scope? LOL Swarovski Claus bought me a 3-12 rail mount......you'd be scared of that 50mm objective. But look mom....no rings! If your PH over in the Dark Continent ever has a need for a funnel in a pinch you can certainly help out................... Lets see pics of that scope, mounted up. Please.........!! Quote Link to comment Share on other sites More sharing options...
Dinsdale Posted December 30, 2014 Share Posted December 30, 2014 (edited) If your PH over in the Dark Continent ever has a need for a funnel in a pinch you can certainly help out................... Lets see pics of that scope, mounted up. Please.........!! Just punch out the lense groups and use it for petrol, that'll work. This is a z6i rail mount with multi zero turret I lifted from a friends photobucket account but gets the idea across.....but basically the "teeth" mate in to the mount. Mount will be here next week, shops closed for holidays. I already have the scope I'm expecting but in a standard ring mount on a R93.... Edited December 30, 2014 by Dinsdale Quote Link to comment Share on other sites More sharing options...
Dinsdale Posted December 30, 2014 Share Posted December 30, 2014 I'd like to try one of these Vortex for a 22lr that needs glass. Wish it was a bit lighter. http://www.vortexoptics.com/product/vortex-diamondback-hp-2-8x32-riflescope-with-v-plex-moa-reticle Quote Link to comment Share on other sites More sharing options...
Pygmy Posted December 30, 2014 Author Share Posted December 30, 2014 Damn !! What those Europeans won't think of next !! Before we know it they'll have flush toilets or some such outlandish contraption !!<<grin>> Quote Link to comment Share on other sites More sharing options...
steve863 Posted December 30, 2014 Share Posted December 30, 2014 Jeez, that groundhog deserves nothing less than 40 virgins in groundhog heaven after letting himself get shot by such an expensive rifle/scope combination!! LOL 1 Quote Link to comment Share on other sites More sharing options...
Pygmy Posted December 30, 2014 Author Share Posted December 30, 2014 I could send him to a place not too far west of Addison where he could find 40 WOODCHUCKS, but he'd be hard pressed to find a virgin ! 1 Quote Link to comment Share on other sites More sharing options...
steve863 Posted December 30, 2014 Share Posted December 30, 2014 Pygmy, I think there are a few lonely hunters on this forum that would let themselves get shot by some cheap rusted out clunker gun, to get one virgin, let alone 40. Come to think of it they'd probably let themselves get shot for only a kiss from a floozy that didn't have any teeth!! LOL Quote Link to comment Share on other sites More sharing options...
Pygmy Posted December 30, 2014 Author Share Posted December 30, 2014 (edited) Hehehehe... In the area I am talking about, the definition of a virgin is " A person who has never had intimate relations outside his/her immediate family".... Tooth/Teeth are definitely optional. Edited December 30, 2014 by Pygmy 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.