Jump to content

Smokeless Powder Burn Rates Fastest to Slowest


airedale
 Share

Recommended Posts

 
Numerous variables preclude the possibility of exact burn rate comparisons. Exercise proper handloading techniques and safety precautions at all times when handloading ammunition.
 
This is the most up to date complete listing I have come across, 266 smokeless powders from all the major manufacturers fastest to the slowest.

 

PCL 514 (PB Clermont)
R-1 (Norma)
AP-30N (ADI)
PK3 (Bofors)
P805 (Rottwil)
BA 10 (Vectan)
N310 (Vihtavuori)
Titewad (Hodgdon)
Nitro 100 (Accurate)
Bullseye (Alliant)
Pis-3 (Nobel)
Solo 1000 (Accurate)
P801 (Rottweil)
S121 (Somchem)
Red Diamond (Scot)
AS (Vectan)
Red Dot (Alliant)
PCL 509 (PB Clermont)
PK5 (Bofors)
e3 (Alliant)
NOB-78 (Nobel)
Solo 1000 (Scout)
MS200 (Somchem)
Promo (Alliant)
AS- 30N (ADI)
Titegroup (Hodgdon)
No. 2 (Accurate)
American Select (Alliant)
AA Plus (Winchester)
N2010 (Norma)
Clays (Hodgdon)
N320 (Vihtavuori)
Competition (Ramshot)
Royal D (Scot)
WST (Winchester)
AP- 50N (ADI)
HP38 (Hodgdon)
452AA (Winchester)
453 (Scot)
231 (Winchester)
PB (IMR)
Zip (Ramshot)
700X (IMR)
Green Dot (Alliant)
AS- 50N (ADI)
International Clays (Hodgdon)
PCL 515 (PB Clermont)
NOB-80 (Nobel)
No. 5 (Accurate) 
473AA (Winchester)
HS-5 (Hodgdon)
WSL (Winchester)
PK4 (Bofors)
PCL 506 (PB Clermont)
P804 (Rottweil)
PCL 501 (PB Clermont)
Unique (Alliant)
Universal Clays (Hodgdon)
NOB-82 (Nobel)
N330 (Vihtavuori)
AP- 70N (ADI)
Power Pistol (Alliant)
SR-7625 (IMR)
HS-6 (Hodgdon)
AS-70N (ADI)
Silhouette (Ramshot)
NOB-84 (Nobel)
WAP (Winchester)
N340 (Vihtavuori)
P803 (Rottweil)
MP200 (Somchem)
A1 (Vectan)
AP-90N (ADI)
540 (Winchester)
Herco (Alliant)
WSF (Winchester)
BA9 (Vectan)
SR-4756 (IMR)
PCL 504 (PB Clermont)
AP- 100 (ADI)
PK6 (Bofors)
AO (Vectan)
Solo 1250 (Accurate)
S221 (Somchem)
SP8 (Vectan)
3N37 (Vihtavuori)
800X (IMR)
No. 7 (Accurate)
Longshot (Hodgdon)
Solo 1500 (Scot)
True Blue (Ramshot)
NOB-86 (Nobel)
P806 (Rottweil)
SP2 (Vectan)
N350 (Vihtavuori)
3N38 (Vihtavuori)
HS-7 (Hodgdon)
Blue Dot (Alliant)
571 (Winchester)
NOB-PP1 (Nobel)
N105 (Vihtavuori)
No. 9 (Accurate)
Enforcer (Ramshot)
4100 (Scot)
Steel (Alliant)
2400 (Alliant)
N110 (Vihtavuori)
Lil Gun (Hodgdon)
30 Carbine (Rottweil)
R123 (Norma)
PCL 512 (PB Clermont)
NOB-89 (Nobel)
SP3 (Vectan)
R910 (Rottweil)
S265 (Somchem)
REV-1 (Nobel)
H110 (Hodgdon)
REV-3 (Nobel)
BA6 (Vectan)
296 (Winchester)
AR2205 (ADI)
SR-4759 (IMR)
N120 (Vihtavuori)
4227 (IMR)
RP1 (Bofors)
R901 (Rottweil)
H4227 (Hodgdon)
5744 XMR (Accurate)
410 (Alliant)
RIF-3 (Nobel)
N130 (Vihtavuori)
SP-3 (Vectan)
680 (Winchester)
N200 (Norma)
PCL 508 (PB Clermont)
1680 (Accurate)
TU2000 (Vectan)
AR2207 (ADI)
H4198 (Hodgdon)
N133 (Vihtavuori)
4198 (IMR)
BM1 (ADI)
Brig 4197 (Scot)
2015 XMR (Accurate)
Brig 3032 (Scot)
Reloader 7 (Alliant)
RIF-2 (Nobel)
3031 (IMR)
Benchmark (Hodgdon)
BM2 (ADI)
RP2 (Bofors)
R902 (Rottweil)
S321 (Somchem)
N201 (Norma)
Brig 322 (Scot)
AR2219 (ADI)
H322 (Hodgdon)
TU3000 (Vectan)
X-Terminator (Ramshot)
2230 (Accurate)
RIF-1 (Nobel)
748 (Winchester)
Reloader 10X (Alliant)
BLC-2 (Hodgdon)
AR2206 (ADI)
2460 (Accurate)
H335 (Hodgdon)
TAC (Ramshot)
H4895 (Hodgdon)
2495 XMR (Accurate)
AR2206H (ADI)
PCL 507 (PB Clermont)
N202 (Norma)
SP10 (Vectan)
BOF7.62 (Bofors)
S335 (Somchem)
Reloader 12 (Alliant)
4895 (IMR)
Brig 4065 (Scot)
N135 (Vihtavuori)
SP9 (Vectan)
Varget (Hodgdon)
5000 (Vectan)
AR2208 (ADI)
4064 (IMR)
4064 XMR (Accurate)
2520 (Accurate)
SP7 (Vectan)
4320 (IMR)
N203 (Norma)
R903 (Rottweil)
PCL 516 (PB Clermont)
BOF RP3 (Bofors)
N140 (Vihtavuori)
N540 (Vihtavuori)
2700 (Accurate)
Big Game (Ramshot)
Reloader 15 (Alliant)
H380 (Hodgdon)
N203B (Norma)
S361 (Somchem)
S355 (Somchem)
R907 (Rottweil)
760 (Winchester)
Brig 4351 (Scot)
H414 (Hodgdon)
RIF-0 (Nobel)
TU5000 (Vectan)
PCL 511 (PB Clermont)
N150 (Vihtavuori)
N550 (Vihtavuori)
4350 XMR (Accurate)
4350 (IMR)
S365 (Somchem)
TU7000 (Vectan)
AR2209 (ADI)
H4350 (Hodgdon)
N204 (Norma)
R904 (Rottweil)
BOF RP4 (Bofors)
Hunter (Ramshot)
Reloader 19 (Alliant)
N160 (Vihtavuori)
N560 (Vihtavuori)
4831 (IMR)
Brig 4831 (Scot)
AR2213SC (ADI)
N205 (Norma)
3100 XMR (Accurate)
S385) Somchem)
WMR (Winchester)
H4831 (Hodgdon)
MRP (Norma)
S371 (Somchem)
R905 (Rottweil)
BOF RP5 (Bofors)
Reloader 22 (Alliant)
785 (Winchester)
H450 (Hodgdon)
Mag Pro (Accurate)
N165 (Vihtavuori)
WXR (Winchester)
7828 (IMR)
H1000 (Hodgdon)
SP12 (Vectan)
PCL 517 (PB Clermont)
AR2217 (ADI)
Magnum (Ramshot)
Reloader 25 (Alliant)
MRP2 (Norma)
TU8000 (Vectan)
AR2225 (ADI)
Retumbo (Hodgdon)
W785 (Winchester)
H870 (Hodgdon)
AR2218 (ADI)
B-12.7 (Somchem)
N170 (Vihtavuori)
AR2211 (ADI)
8700 (Accurate)
24N41 (Vihtavuori)
W870 (Winchester)
50 BMG (Hodgdon)
H5010 (Hodgdon)
PCL 513 (PB Clermont)
SP13 (Vectan)
20N29 (Vihtavuori)  

(slowest burn rate)

 

 

Edited by airedale
Link to comment
Share on other sites

This information would definitely be used in conjunction with various reloading manuals. This kind of info would probably not be of much interest to the average reloader, for someone that has gone off the deep end it can be very enlightening.

 

Al

  • Like 1
Link to comment
Share on other sites

You can’t inter change powders. I reload 444 marlins and use reloader7, IMR- 4198 and H-4198 they all have close to the same burn rate. But you can’t inter change them grain for grain. That’s why you have a reloading book. It’s your recipe book even changing primers can increase pressure. Never use powder that’s not listed for the caliber your loading. There may be different powders you could use for that caliber that’s not listed in the book you’re using. That’s why most of us have more than one book and use the internet. Never make up your own shit.

  • Like 1
Link to comment
Share on other sites

  • 6 months later...
You can’t inter change powders. I reload 444 marlins and use reloader7, IMR- 4198 and H-4198 they all have close to the same burn rate. But you can’t inter change them grain for grain. That’s why you have a reloading book. It’s your recipe book even changing primers can increase pressure. Never use powder that’s not listed for the caliber your loading. There may be different powders you could use for that caliber that’s not listed in the book you’re using. That’s why most of us have more than one book and use the internet. Never make up your own shit.

So you're saying I shouldn't keep using the Superformance powder for my .270 I measured out of the Superformance round? I have been doing it for years with no over pressure signs and getting the same velocity they list on the package. Not saying anyone should do it but a couple local guys did it first and I went to the range to see for myself.

Sent from my SM-G900V using Tapatalk

Link to comment
Share on other sites

  • 2 years later...
  • 2 years later...
  • this thread is getting old, but is still being viewed so will benefit from this warning. The past summer I arrived at my local range to find an individual staggering around in a daze, holding his L forearm up, with blood splattered across his face. He stated his rifle just  blew up. I assisted him to his truck, where a friend was driving him to recieve medical care. The shooter did say he was shooting reloads from an unknown source., 30-06 out of a bolt action rifle. I picked up the magazine. floor plate and 1/2 of a reciever wall that was blown out. 
  • You never know what conditoin someone elses rifles are in, or the detail they payed to the loading process. Never trust someone elses loads or loading recommendations unless you can verify them in a manual.
  • Like 1
Link to comment
Share on other sites

27 minutes ago, Daveboone said:
  • this thread is getting old, but is still being viewed so will benefit from this warning. The past summer I arrived at my local range to find an individual staggering around in a daze, holding his L forearm up, with blood splattered across his face. He stated his rifle just  blew up. I assisted him to his truck, where a friend was driving him to recieve medical care. The shooter did say he was shooting reloads from an unknown source., 30-06 out of a bolt action rifle. I picked up the magazine. floor plate and 1/2 of a reciever wall that was blown out. 
  • You never know what conditoin someone elses rifles are in, or the detail they payed to the loading process. Never trust someone elses loads or loading recommendations unless you can verify them in a manual.

Good advice. I see guys passing around loading data to each other all the time on the web.To me working up passed max. loads is playing Russian roulette.I always seem to find the sweet spot just under max.anyway.

  • Like 1
Link to comment
Share on other sites

11 hours ago, Daveboone said:
  • this thread is getting old, but is still being viewed so will benefit from this warning. The past summer I arrived at my local range to find an individual staggering around in a daze, holding his L forearm up, with blood splattered across his face. He stated his rifle just  blew up. I assisted him to his truck, where a friend was driving him to recieve medical care. The shooter did say he was shooting reloads from an unknown source., 30-06 out of a bolt action rifle. I picked up the magazine. floor plate and 1/2 of a reciever wall that was blown out. 
  • You never know what conditoin someone elses rifles are in, or the detail they payed to the loading process. Never trust someone elses loads or loading recommendations unless you can verify them in a manual.

I once had one of my hunting buddies pissed off at me at camp when I would not lend him some of my handloads (which are not resized) because he was low on ammo.  It wasn't until 3 other handloaders told him that was the right thing did he get over it.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...