fasteddie Posted March 23, 2011 Share Posted March 23, 2011 Drill a hole in the rail , seat , etc of your chain-on or ladderstand . Put an eyebolt with 2 nuts and a lock washer in the hole . Tighten it down . Use a carabiner and hang your backpack via the eyebolt . The backpack will be in easy reach ! Quote Link to comment Share on other sites More sharing options...
Lawdwaz Posted March 23, 2011 Share Posted March 23, 2011 Good tip. Sometimes I'm a bit leery of that when my pack is a bit too heavy, like on an all day sit. I might have two thermos bottles, sangwiches, snick snacks, extra clothes, rain suit, camera etc. She gets a bit heavy and could be too much weight to one side of the stand and put it out of balance. Typically, I'll just let it down to the ground with a haul rope and if I need nutrition, I just haul her up and get what I need. If I don't have much, I'll just put the important things in the saddle bags that hang from each side and the front of the Treewalker climber. They work good. (Summit made) Quote Link to comment Share on other sites More sharing options...
WNYBuckHunter Posted March 23, 2011 Share Posted March 23, 2011 I have a carabiner on my backpack and hang it from the side of my stand. I dont bother with an eye bolt, it works by just using a strap or one of the bars on the stand. Works out good. Quote Link to comment Share on other sites More sharing options...
wooly Posted March 23, 2011 Share Posted March 23, 2011 Last year was my first hunting primarily from a stand so I still have some fears to overcome. On average durring hunting season my pack weighs right around 15lbs. sometimes more. I'd be afraid drilling any part of ANY part of ANY stand would damage structural integrity over the long term for sure and possibly immediate weakening of the stand overall. When I reach the end of my tow rope, I know exactly how high I am and let the weight of my bow and pac keep evenly distributed weight on each side of the top half of the climber while I turn to reposition. Once I get the top seat section planted firmly in the tree at this point, I pull up my gear and hang it from a tree step. Any aftermarket modifications or unnecesary equiptment attached to the stand just seems like a recipe for disaster IMO. ??? Quote Link to comment Share on other sites More sharing options...
fasteddie Posted March 23, 2011 Author Share Posted March 23, 2011 Wooly -- How much structural damage is caused by the bolt holes that are used to retain the seat , and the platform brackets as well as the ladder sections ? Quote Link to comment Share on other sites More sharing options...
wooly Posted March 23, 2011 Share Posted March 23, 2011 LOL- you got me. I'm scared in a stock stand! ??? Quote Link to comment Share on other sites More sharing options...
fasteddie Posted March 23, 2011 Author Share Posted March 23, 2011 Sorry Wooly but I just had to pick on an old NYDEER buddy . Another method of hanging a backpack would be to carry an extra rachet or cinch strap . Run the strap through the straps on the backpack and tighten . No holes needed ...... Quote Link to comment Share on other sites More sharing options...
hunter49 Posted March 23, 2011 Share Posted March 23, 2011 I just screw in an extra tree step & carry 1 when I use my climber to screw in. Quote Link to comment Share on other sites More sharing options...
MuzzyLoader Posted March 23, 2011 Share Posted March 23, 2011 I hang my backpack from an old broken limb that extends from the tree about 4" when I'm at my ladder stand located on my hunting buddy's property. When I use the climber on my buddy's property I screw in a 'turkey foot' and hang my stuff from that. I leave it tied to a pull rope attached to the stand when I'm on my cousin's property. I like the idea you suggested regarding the eye bolt. Quote Link to comment Share on other sites More sharing options...
fasteddie Posted March 23, 2011 Author Share Posted March 23, 2011 I try not to screw anything into the trees where I have stands . I doubt one or two screws would do any damage but I try to avoid it . I have several stands on different properties . Quote Link to comment Share on other sites More sharing options...
First-light Posted March 23, 2011 Share Posted March 23, 2011 I try not to screw anything into the trees where I have stands . I doubt one or two screws would do any damage but I try to avoid it . I have several stands on different properties . What do you do with your bow if there is no branches to hang from? Do you use the bow holder that goes on the stand? Quote Link to comment Share on other sites More sharing options...
fasteddie Posted March 23, 2011 Author Share Posted March 23, 2011 I use a HME Universal Mount Bow Holder on my ladderstands Quote Link to comment Share on other sites More sharing options...
Dave Posted March 25, 2011 Share Posted March 25, 2011 What about those J hooks. They are usually rubber coated to last especially if you use the stand year after year. Takes only a minute to screw it into the tree. Dave Quote Link to comment Share on other sites More sharing options...
fasteddie Posted March 25, 2011 Author Share Posted March 25, 2011 What about those J hooks. They are usually rubber coated to last especially if you use the stand year after year. Takes only a minute to screw it into the tree. Dave I have used various hooks , screw-ins , etc .. Just trying to avoid screwing anything into a trre that might be objected to by the landowner . Some of them are a tad fussy . Quote Link to comment Share on other sites More sharing options...
Live2Hunt Posted October 5, 2012 Share Posted October 5, 2012 Good tip. Sometimes I'm a bit leery of that when my pack is a bit too heavy, like on an all day sit. I might have two thermos bottles, sangwiches, snick snacks, extra clothes, rain suit, camera etc. She gets a bit heavy and could be too much weight to one side of the stand and put it out of balance. Typically, I'll just let it down to the ground with a haul rope and if I need nutrition, I just haul her up and get what I need. If I don't have much, I'll just put the important things in the saddle bags that hang from each side and the front of the Treewalker climber. They work good. (Summit made) I put another strap around the tree and hang my pack of it with the carbiner. I hate having anything on my stand to make it unbalanced. Quote Link to comment Share on other sites More sharing options...
Early Posted October 5, 2012 Share Posted October 5, 2012 Run a short length of nylon rope through a carabiner, hook, or whatever; Double the rope, wrap it around the tree and secure with a timber hitch...with loop and hook available for your pack. Quote Link to comment Share on other sites More sharing options...
Nomad Posted October 13, 2012 Share Posted October 13, 2012 On the top loop of my pack is a loop of rope, a "S" biner which is a S shaped piece of metal with two spring clips that close up the open parts. I just hang it from the "s" hook.OR sometimes if I want it higher I wrap the pack straps around the tree and use the S hook bewteen the two straps. I also hang my headlamp from the packs loop so I can find it easy in the dark. Most of my hang ons have a tree step up above the stand as a hand hold when stepping down on to stand,I can hang the rope loop on that as well. Quote Link to comment Share on other sites More sharing options...
irish_redneck Posted October 31, 2012 Share Posted October 31, 2012 I use a HME Universal Mount Bow Holder on my ladderstands That looks like it's on the inside of the arm rest, am I seeing that correctly? If so , does it get a little cramped? Quote Link to comment Share on other sites More sharing options...
irish_redneck Posted October 31, 2012 Share Posted October 31, 2012 for the backpack I have a "Hunter's Specialties Tree Accessory Belt" , not sure if the hooks are suitable for that much weight so I put the strap through the loop in pack, it has multiple clips and two hooks for calls, rangefinder, binoculars etc. everything within reach and no damage to the tree Quote Link to comment Share on other sites More sharing options...
Live2Hunt Posted October 31, 2012 Share Posted October 31, 2012 I use a strap (w/buckle) or small ratchet strap with a carbiner. Snap my pack to that. I use to hang it from my climber seat but had it through the seat out of balance and the seat move when I got up . Scared the crap out of me, so never again. I pack in lunch, thermos, water bottle, ect. the strap is by far the easiest without putting any holes in the tree. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.