Academy 2019

[Marion]

  On 9/4/2019 at 9:53 AM, Jeremy K said:

I'm far too lazy to fill the tub and then dry the arrows afterwards  LOL

You float them? How's that work?

Sent from my SM-G935V using Tapatalk

[Jeremy K]

  On 9/4/2019 at 4:35 PM, The Jerkman said:

You float them? How's that work?

Sent from my SM-G935V using Tapatalk
 

Expand  

I guess the technique is to fill the tub and float a bare shaft ,the idea is that the spine will be the part highest in the water.

[mlammerhirt]

Jeremy did you make that spine tester or buy it? Looks like a sweet setup.

Sent from my moto z3 using Tapatalk

[Marion]

  On 9/4/2019 at 4:51 PM, Jeremy K said:

I guess the technique is to fill the tub and float a bare shaft ,the idea is that the spine will be the part highest in the water.

Oh well then that doesn't do me any good. All my shafts have the inserts installed already.

Sent from my SM-G935V using Tapatalk

[Fletch]

You guys getting way into it!! I buy arrows and not the $100 per 6 ones, more like the $60 for a dozen ones, take em home and shoot them. If any consistently don't fly good they get excommunicated. The rest all hit a 2 inch bull out to 40 and go kill deer.

[Jeremy K]

  On 9/4/2019 at 4:56 PM, mlammerhirt said:

Jeremy did you make that spine tester or buy it? Looks like a sweet setup.

Sent from my moto z3 using Tapatalk
 

Expand  

I made that one ,the idea was to incorporate the base into a work bench ,from there I wanted to be able to switch between the stuff for checking spine and the stuff to cut arrows.

[Marion]

My next set of arrow shafts will probably be the new firenock super tight carbon fiber ones. They look sick!

Sent from my SM-G935V using Tapatalk

[moog5050]

  On 9/4/2019 at 5:01 PM, Jeremy K said:

I made that one ,the idea was to incorporate the base into a work bench ,from there I wanted to be able to switch between the stuff for checking spine and the stuff to cut arrows.

Expand  

I have never gone as far as checking actual spine and indexing for spine.  I limit it to indexing the BH so that it is always point up when fletched and nocked.  Do you see a difference and how far out of spine are most commercial arrows?

[Jeremy K]

  On 9/4/2019 at 5:13 PM, moog5050 said:

I have never gone as far as checking actual spine and indexing for spine.  I limit it to indexing the BH so that it is always point up when fletched and nocked.  Do you see a difference and how far out of spine are most commercial arrows?

Expand  

The 6 I just did for Jay, one of the nocks needed to be turned maybe 15 degrees. With this way at least you get the strong sides lined up Instead of having a couple that are 180 off from the rest . I've never done any kind of testing to verify any accuracy over a group of arrows that haven't been checked . It was just fun to make and only takes a few seconds per arrow to check.

[moog5050]

  On 9/4/2019 at 1:05 AM, sodfather said:

I shot a 288 at 60pounds , Jeremy K around 270 I think, TF was at 245 I think , Lawdz 250ish and Arcade was 220’s I think . 

 

Expand  

Throw up the bow and arrow specs.  As one that chrono-ed compounds all the time several years ago, the curiosity is killing me. 

[Marion]

Now I need to Chrono my bow! I'm pulling 70lbs+

Sent from my SM-G935V using Tapatalk

[The_Real_TCIII]

  On 9/4/2019 at 7:25 PM, The Jerkman said:

Now I need to Chrono my bow! I'm pulling 70lbs+

Sent from my SM-G935V using Tapatalk

What else? Bow model? Arrow weight, draw length? Online calculators get pretty close


Sent from my iPhone using Tapatalk Pro

[moog5050]

  On 9/4/2019 at 7:25 PM, The Jerkman said:

Now I need to Chrono my bow! I'm pulling 70lbs+

Sent from my SM-G935V using Tapatalk
 

Expand  

My obsession phoenix that grampy now owns was hitting 273-74 with a 520g arrow at 82lbs.  My current PSE Evolve is almost identical with the same arrow at 71lbs.   Seems like most of the newer bows are flat out fast.  Oh and 28" DL.

Edited September 4, 2019 by moog5050

[The_Real_TCIII]

  On 9/4/2019 at 5:00 PM, Fletch said:

You guys getting way into it!! I buy arrows and not the $100 per 6 ones, more like the $60 for a dozen ones, take em home and shoot them. If any consistently don't fly good they get excommunicated. The rest all hit a 2 inch bull out to 40 and go kill deer.

Where’s the fun in that?? I actually stopped hunting with high end shafts as I see no need for it but I still build expensive 3D arrows (although there is no need for it lol)


Sent from my iPhone using Tapatalk Pro

[Marion]

  On 9/4/2019 at 7:36 PM, moog5050 said:

My obsession phoenix that grampy now owns was hitting 273-74 with a 520g arrow at 82lbs.  My current PSE Evolve is almost identical with the same arrow at 71lbs.   Seems like most of the newer bows are flat out fast.

How the hell is grampy pulling 82lbs? I would love to get 90lb limbs. My arrows would be like heat seeking missiles

Sent from my SM-G935V using Tapatalk

[turkeyfeathers]

  On 9/4/2019 at 7:18 PM, moog5050 said:

Throw up the bow and arrow specs.  As one that chrono-ed compounds all the time several years ago, the curiosity is killing me. 

Expand  

shooting 249   Bow Tech Old Glory  Victory decimator 400   28.5' draw me thinks   54.6 pounds I believe

[Marion]

  On 9/4/2019 at 7:35 PM, The_Real_TCIII said:

What else? Bow model? Arrow weight, draw length? Online calculators get pretty close

 

 

Sent from my iPhone using Tapatalk Pro

2012 or 13 elite Hunter 28 inch draw I believe. I'd have to weigh my arrows though

 

Sent from my SM-G935V using Tapatalk

 

 

 

[The_Real_TCIII]

  On 9/4/2019 at 7:41 PM, The Jerkman said:

2012 or 13 elite Hunter 28 inch draw I believe. I'd have to weigh my arrows though

 

Sent from my SM-G935V using Tapatalk

 

 

 

Expand  

278 with a 400 grain arrow

[moog5050]

  On 9/4/2019 at 7:41 PM, The Jerkman said:

How the hell is grampy pulling 82lbs? I would love to get 90lb limbs. My arrows would be like heat seeking missiles

Sent from my SM-G935V using Tapatalk
 

Expand  

We changed limbs.  He is around 50 or just under if I recall.  I had a 90lb elite judge.  Was not as fast as the other 2 mentioned above.

[moog5050]

  On 9/4/2019 at 7:46 PM, The_Real_TCIII said:

278 with a 400 grain arrow

Expand  

and a 32" DL I am guessing.  lol  What weight.

[turkeyfeathers]

RE: spining arrows           That was a major buzz years back in the golf club (shaft) business    A 100 shaft to get spined would cost another 100$    BUT the leaders of the top end shafts you'd pay $350 -500 and they weren't spined. Big mumble jumble money grab IMO

[The_Real_TCIII]

  On 9/4/2019 at 7:47 PM, moog5050 said:

and a 32" DL I am guessing.  lol  What weight.

Expand  

[The_Real_TCIII]

  On 9/4/2019 at 7:47 PM, turkeyfeathers said:

RE: spining arrows           That was a major buzz years back in the golf club (shaft) business    A 100 shaft to get spined would cost another 100$    BUT the leaders of the top end shafts you'd pay $350 -500 and they weren't spined. Big mumble jumble money grab IMO

Expand  

My clubs are in the tub right now, will report findings.

 

Findings: Im getting a divorce

[Marion]

  On 9/4/2019 at 7:49 PM, The_Real_TCIII said:

Ah man that so slow

Sent from my SM-G935V using Tapatalk

[Robhuntandfish]

  On 9/4/2019 at 7:49 PM, The_Real_TCIII said:

Expand  

lol - i just used the same page and got 285.   prob cause i am shooting 340s and prob less KE

Edited September 4, 2019 by Robhuntandfish