Jump to content

Live From The Woods 2024-2025 Edition


landtracdeerhunter

Recommended Posts

Friday afternoon sit produced a lot of eating machine young ones. A few antlerless bucks and yearly doe also came in. The bucks seem alot more at ease without their horns.

Saturday am. brought in a surprising number.  With the thaw in progress, easier eating without having to paw through the snow. Looks like tonight could be a good sit, if the winds stay light.

  • Like 1
Link to comment
Share on other sites

So me and a cpl guys came up to the Cortland area late this morning we have doe tags for 7r for the holiday hunt. We got a 3 hr sit this afternoon and seen nothing and only heard one shot. We are hunting the pipeline Rd in the tuller hill State Forest. We seen way more predator tracks than deer tracks. We got all day tomorrow to hunt but considering going elsewhere. These are some pretty big tracks I'm thinking bear?c91b16db01443ede43fca4c77dfea7b8.jpg

Sent from my moto g power (2022) using Tapatalk

Link to comment
Share on other sites

Muzzleloader WNY Buck
Sat in a tree for 3.5 hrs. A few doe ran up to me about 10:30. I raised up on one and, pft.... misfire. Saw three run off I put a new primer in and after a few minutes wondered if my powder got wet. It did. Pushed the bad load out with my ram rod and pushed my ram rod through with a stick from the tree I was in. Reloaded and waited till noon. Got down and walked through the wet leaves in silence with the wind in my favor. Followed a trail of fresh scat piles every 50/100 yds and as I popped my head over a hill/mound i saw him standing about 70 yds looking in my direction. I knew he couldn't smell me. I raised up quick, pulled the hammer back lined him up and squeezed. As the smoke cleared I saw two more deer run off that were with him. I reloaded quick and peered through my binos. He dropped dead right where he was standing.
100gr white hots
300gr powerbelt aerolights
Remington primer
Cva optima4792cd915459d9ef3004bb513c39b1fa.jpgea429f7c45b0099a27aeb252b09c6a1c.jpg38b7eda1d90107a13d4364ef8e9aebe1.jpg

Sent from my Pixel 4 XL using Tapatalk

  • Like 10
Link to comment
Share on other sites

A bunch of tearing doe along with a young 6 pointer came out about 4:10 New Years Eve afternoon sit. Started raining about  5ish when the older doe with twins came out with extreme caution. They ate their way over to the wheat as as dusk fell.

Looks like todays going to be wet snow and  breezy as we come to a close. Good luck to those heading out .

Link to comment
Share on other sites

13 hours ago, buffalojay83 said:

Muzzleloader WNY Buck
Sat in a tree for 3.5 hrs. A few doe ran up to me about 10:30. I raised up on one and, pft.... misfire. Saw three run off I put a new primer in and after a few minutes wondered if my powder got wet. It did. Pushed the bad load out with my ram rod and pushed my ram rod through with a stick from the tree I was in. Reloaded and waited till noon. Got down and walked through the wet leaves in silence with the wind in my favor. Followed a trail of fresh scat piles every 50/100 yds and as I popped my head over a hill/mound i saw him standing about 70 yds looking in my direction. I knew he couldn't smell me. I raised up quick, pulled the hammer back lined him up and squeezed. As the smoke cleared I saw two more deer run off that were with him. I reloaded quick and peered through my binos. He dropped dead right where he was standing.
100gr white hots
300gr powerbelt aerolights
Remington primer
Cva optima4792cd915459d9ef3004bb513c39b1fa.jpgea429f7c45b0099a27aeb252b09c6a1c.jpg38b7eda1d90107a13d4364ef8e9aebe1.jpg

Sent from my Pixel 4 XL using Tapatalk
 

Awesome hunt. Hate those misfires. How did you take out the breach plug to get the powder out. Do you bring the tool on the hunt with you?

Link to comment
Share on other sites

Awesome hunt. Hate those misfires. How did you take out the breach plug to get the powder out. Do you bring the tool on the hunt with you?
The beach plug just unscrews on mine. The hard part was clearing the round because the ram rod is shorter than the barrel. So I unscrewed the palm saver on the ram rod, pushed the ram rod as far as I could through the barrel from the break, then pushed the ram rod with a stick to clear the bad power and round out of the muzzle, then just pulled out the ram rod and reloaded.

Sent from my Pixel 4 XL using Tapatalk

Link to comment
Share on other sites

1 hour ago, buffalojay83 said:

The beach plug just unscrews on mine. The hard part was clearing the round because the ram rod is shorter than the barrel. So I unscrewed the palm saver on the ram rod, pushed the ram rod as far as I could through the barrel from the break, then pushed the ram rod with a stick to clear the bad power and round out of the muzzle, then just pulled out the ram rod and reloaded.

Sent from my Pixel 4 XL using Tapatalk
 

Got ya. Yeah mine unscrews also but i need the tool to do it. I'll start bringing it with me for sure. Congrats again!

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...