NYBuckHunter27 Posted October 22, 2016 Share Posted October 22, 2016 Just purchased a T/C triumph bone collector 50 cal. muzzleloader with Nikon Inline Scope, i was wondering what loads and sabots are producing the best with this gun? i currently have some harvester sabots but unfortunately the Nikon spot technology does not have any info for the harvester sabots. Quote Link to comment Share on other sites More sharing options...
ants Posted October 22, 2016 Share Posted October 22, 2016 I just bought the same rifle and sighted it in the other day. I used the Power Belt Aero tip 300grian, with 2 50grn pyrodex pellets. They flew OK but not great. Im actually looking for something better. Quote Link to comment Share on other sites More sharing options...
PREDATE Posted October 22, 2016 Share Posted October 22, 2016 Although my ml is a Rem.700 I found the Hornady Monoflex to be a superb deer load. Worth a try IMO Quote Link to comment Share on other sites More sharing options...
CharlieNY Posted October 22, 2016 Share Posted October 22, 2016 I also have a T/C Triumph. I shoot Hornady SST-ML High Speed Low Drag Sabots 250 gr. with a powder charge of 90 gr. of Blackhorn 209 powder. This combination is extremely accurate out of my rifle and is deadly on whitetails. I hope this helps and good luck. Quote Link to comment Share on other sites More sharing options...
Larry Posted October 22, 2016 Share Posted October 22, 2016 Try this: try shooting it with different loads and bullets and powder. Quote Link to comment Share on other sites More sharing options...
cdmckane Posted October 29, 2016 Share Posted October 29, 2016 My go-to load is 100 gr of 777 loose powder under a 300 gr .452 Hornady XTP in a black MMP sabot fired with a CCI 209 primer. This load has dropped many a whitetail from both of my MLs out to 200 yds. I really want to try it on a black bear, but haven't gotten the opportunity yet. 1 Quote Link to comment Share on other sites More sharing options...
wolc123 Posted October 29, 2016 Share Posted October 29, 2016 I use (2) 50 gr 777 pellets with the same bullet and sabot that CDM uses with my T/C Omega 50 cal. Other than a single glitch about 10 years ago, where I did not find the buck until the coyotes ate most of it, it has worked well every time (it was actually 100 gr of loose pyrodex on that one). I fired similar loads at about a dozen deer (including the one I posted in the harvest thread last week), and all but that one ended up in my freezer. That lost buck was at 175 yards, and I would certainly not try that far again with it. The accuracy is fine at 200 (5" diameter, 3 shot group), but I learned the hard way that there is not enough energy left at 175 yards for a good clean kill at a buck that presents a quartering away shot. A broadside shot at that range might be doable, but I will not try it. These days, I use my laser rangefinder to be sure that I stay within my limitations and for me that is 150 yards. This year's doe was only 25 yards away and the bullet went thru on a high lung shot. There was very little if any blood on her 40 yard trail, but the chest cavity was full when I gutted her. About half of the deer I have hit with that load, at ranges under 75 yards, have fallen dead in their tracks, while the rest have not made it farther than 50 yards. I am confident it would work well between 75 and 150 yards, based on energy tables, but have yet to try it there. I have got to admit that I was a little scared hunting in NY Adirondack bear country a couple weeks ago with that load. I definitely would have thought twice before shooting at one with it while I was deer hunting. I am sure it would do the job at close range or broadside behind the shoulder at longer ranges. I was a lot more comfortable with my 6 shot 30/06 after rifle season opened last Saturday. When I first bought the Omega, I tried many different loads and bullets. Nothing shot as accurate as those Hornady XTP's in the black sabots. The gun actually came from the factory with a tube of (5) of them. I wasted a lot of money trying other stuff. My 100 yard accuracy was the best with 100 grains of loose pyrodex (2" diameter, 3 shot group). Two 50 gr 777 pellets now hit the same place for me at 100 yards on the range, and the pellets are handier for loading and unloading. 1 Quote Link to comment Share on other sites More sharing options...
Huntscreek Posted October 31, 2016 Share Posted October 31, 2016 The best I found is 209 powder with Hornady XTP 45 cal's buy your sabots and bullets will run you $30 for 50. They are knock down dead bullets. Check the web on them, you will like them. 1 Quote Link to comment Share on other sites More sharing options...
cdmckane Posted October 31, 2016 Share Posted October 31, 2016 11 hours ago, Huntscreek said: The best I found is 209 powder with Hornady XTP 45 cal's buy your sabots and bullets will run you $30 for 50. They are knock down dead bullets. Check the web on them, you will like them. I love Blackhorn 209. Unfortunately, it's not available local to me and it's way too expensive to ship. Triple Se7en is available and it works If my local shop ever starts carrying BH209, I'll make the switch. Quote Link to comment Share on other sites More sharing options...
cdmckane Posted October 31, 2016 Share Posted October 31, 2016 Wolc, FWIW, I've found that loose 777 is more consistent for me. If a pellet chips or breaks, it's not consistent. I will be going for the early bear season in the NZ next year with my FX Pro Hunter. Under 50 yards, I have no qualms about this load being sufficient on a bear. Quote Link to comment Share on other sites More sharing options...
wolc123 Posted November 1, 2016 Share Posted November 1, 2016 I expect to switch over to Blackhorn 209, when my current supply of 777 pellets are exhausted. The easier cleanup is the main advantage there. I never minded loose powder. I always carried a couple speedloaders, loaded with a bullet in a sabot and the correct measure of powder plus about 5 extra grains, to allow for some spillage in a fast-load situation. With the pellets, I just put (2) in each speedloader, along with the bullet and sabot. I carry the speedloaders and a starter rod in my right side jacket pocket. I only used a second shot one time. A doe that I had "double lunged", with a shot to the side at close range, started to get back up when I got next to her. I am sure it was not necessary, but it was hard to see her suffer, and with the second shot she died. Quote Link to comment Share on other sites More sharing options...
dbHunterNY Posted November 1, 2016 Share Posted November 1, 2016 i shoot a TC ProHunter. I've had good luck with both TC bonded shockwaves and hornady low drag SST 250gr sabots. shockwaves were a tighter fit and actually 150gr on the dot shot really well. sst sabots aren't as tight of a fit and shoot better backed off a little bit from the same powder charge. 100gr was still MOA and I shot that last but could be better. I've got the gun to shot single hole in the past but over the years it's changed a little and had a light pitting around where the powder ring formed. Quote Link to comment Share on other sites More sharing options...
moog5050 Posted November 1, 2016 Share Posted November 1, 2016 TC ProHunter - Barnes TMZ 250g with 120g by volume of 209. Been very accurate, but not the best blood trails. Good news, I haven't had to trail at all. lol Quote Link to comment Share on other sites More sharing options...
borntohunt10820 Posted November 20, 2016 Share Posted November 20, 2016 (edited) In my T/C Triumph with a Nikon Omega scope with the BDC reticle , I use 3 pellets of 777 with a 300 gr. XTP., dead nuts accurate out to 250 yds. Only gun I hunt with for deer. Edited November 20, 2016 by borntohunt10820 add Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.