jjb4900 Posted November 17, 2015 Share Posted November 17, 2015 I see the unloading after every hunt as an advantage over a regular bow because it gives you continuous in-season practice. That is something many conventional archers neglect much to their peril when it comes to wounding or missing deer. I just point it at a pile of dirt and pray to god nothing bad happens....so far, so good.......do you really feel the need to take a dig at conventional archers in every one of your nonsensical posts? 4 Quote Link to comment Share on other sites More sharing options...
stoneam2006 Posted November 17, 2015 Share Posted November 17, 2015 I use a bolt that has the fletching messed up on with a field tip and shoot into soft ground works fine for me Sent from my SM-N920V using Tapatalk Quote Link to comment Share on other sites More sharing options...
jjb4900 Posted November 17, 2015 Share Posted November 17, 2015 Throw some old towels/sweatshirts/rags in a small burlap/nylon bag and tie it closed with a piece of string. Shoot a fieldpoint into it to unload. this is cheaper, lighter, and much easier to pull the bolts out of than a foam block target. To keep the center from getting worn, open it up and stir the rags around from time to time. Last year I carried a block, but this works much better. I see the unloading after every hunt as an advantage over a regular bow because it gives you continuous in-season practice. That is something many conventional archers neglect much to their peril when it comes to wounding or missing deer. if you want thump your Bible and suck on your crossbow like it's some kind of phallic symbol, that's fine....but why do you feel the need to denigrate the conventional archer in all of your posts? if you don't like it, that's fine, but why be disrespectful to the others if it serves no purpose? 3 Quote Link to comment Share on other sites More sharing options...
Fletch Posted November 17, 2015 Share Posted November 17, 2015 I shoot a field tip into the ground. Unfortunately the other day got a rock. Was using one of the arrows that came with the bow though not my customs so no huge loss I got 2 more. Quote Link to comment Share on other sites More sharing options...
bugsNbows Posted July 3, 2016 Share Posted July 3, 2016 Just an FYI, there are some bows currently available can be safely de-cocked utilizing the rope cocking aid. No need to shoot it off. My CAMX is one. It's a great option. Quote Link to comment Share on other sites More sharing options...
Bowguy 1 Posted July 4, 2016 Share Posted July 4, 2016 If you were taking a quad bringing a decocking bag should be easy to do. Quote Link to comment Share on other sites More sharing options...
Bowguy 1 Posted July 4, 2016 Share Posted July 4, 2016 (edited) Throw some old towels/sweatshirts/rags in a small burlap/nylon bag and tie it closed with a piece of string. Shoot a fieldpoint into it to unload. this is cheaper, lighter, and much easier to pull the bolts out of than a foam block target. To keep the center from getting worn, open it up and stir the rags around from time to time. Last year I carried a block, but this works much better. I see the unloading after every hunt as an advantage over a regular bow because it gives you continuous in-season practice. That is something many conventional archers neglect much to their peril when it comes to wounding or missing deer.So you're one of those guys not good enough to shoot a man's bow it seems. How would you know what's conventional archer does?You wanna say something stupid, that was one for ya. Shooting an arrow into a towel n discharging into it imo would be pretty hideous practice, how far do you set it? Do you shoot for the vitals? Aim for a tiny spot on the towel or just the whole thing like a beginner? Do you do this in the dark? If so n you miss at practice yardsge which I'm sure you're perfect enough not to, how do you know a little kid isn't cutting through the farm trying to get home n in now harms way? Know your target n beyond. Maybe you come out during legal light n can see well enough to be sure it's safe. Afraid of the dark? You wanna say stupid stuff people can say stupid things back. No offense to the other crossbow folks. I'm sure your crossbows are manly Edited July 4, 2016 by Bowguy 1 Quote Link to comment Share on other sites More sharing options...
nyslowhand Posted July 4, 2016 Share Posted July 4, 2016 .... Other option is taking the bolt out and holding the string with rope cocker and pull the trigger and let it down slowly..... FYI - Pretty sure this is NOT recommended by any Xbow mfgers! Quote Link to comment Share on other sites More sharing options...
Buckmaster7600 Posted July 4, 2016 Share Posted July 4, 2016 FYI - Pretty sure this is NOT recommended by any Xbow mfgers! Excaliburs and strykers it is. Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
bugsNbows Posted July 4, 2016 Share Posted July 4, 2016 FYI - Pretty sure this is NOT recommended by any Xbow mfgers! Wrong. CAMX recommends this. Works great BTW. Quote Link to comment Share on other sites More sharing options...
Jeremy K Posted July 4, 2016 Share Posted July 4, 2016 Throw some old towels/sweatshirts/rags in a small burlap/nylon bag and tie it closed with a piece of string. Shoot a fieldpoint into it to unload. this is cheaper, lighter, and much easier to pull the bolts out of than a foam block target. To keep the center from getting worn, open it up and stir the rags around from time to time. Last year I carried a block, but this works much better. I see the unloading after every hunt as an advantage over a regular bow because it gives you continuous in-season practice. That is something many conventional archers neglect much to their peril when it comes to wounding or missing deer. Says the guy who needs a scope and a locking device to keep his bow at full draw. Quote Link to comment Share on other sites More sharing options...
Critter4321 Posted July 4, 2016 Share Posted July 4, 2016 Why didn't I see that first? Looks like that one will fit the bill. Thanks I'm pretty sure thats the same one I use it has a big steel round end on it so it dont really go into the ground Quote Link to comment Share on other sites More sharing options...
Bowguy 1 Posted July 4, 2016 Share Posted July 4, 2016 Excaliburs and strykers it is. Sent from my iPhone using Tapatalk I'm not a crossbow guy but is Stryker the ones made by Bowtech? Or is striker a company? If it's Bowtech be careful, they make good stuff imo except from what I've seen, crossbows. Don't know how well they work but in classes I've seen as many as 2 out of 3 break. They seem prone to failure. Least In my experience they are. Id say almost any other crossbow breaks less. Again limited experience, none shooting them but when I test guys using them they're failure prone Quote Link to comment Share on other sites More sharing options...
Buckmaster7600 Posted July 4, 2016 Share Posted July 4, 2016 I'm not a crossbow guy but is Stryker the ones made by Bowtech? Or is striker a company? If it's Bowtech be careful, they make good stuff imo except from what I've seen, crossbows. Don't know how well they work but in classes I've seen as many as 2 out of 3 break. They seem prone to failure. Least In my experience they are. Id say almost any other crossbow breaks less. Again limited experience, none shooting them but when I test guys using them they're failure prone Stryker is owned by bowtech as is Excalibur. Failures will happen with every Xbow, there is a lot of stress on many parts. I bought a Stryker and I have about 200 shots on it now and no problems yet. In my opinion the quality of a product is second only to customer service and in my experience bowtech is second to none, time will tell because mine will be shot a lot more than the average person and if they are not a good product I will know. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Bowguy 1 Posted July 4, 2016 Share Posted July 4, 2016 I've never dealt w Bowtech customer service but shot their bows for years. It's good they're on the game there cause as stated the failure rate seems high. Like from what I'm seeing 3-4 times higher than every other company combined. Hope they got it straightened out. Plus the finish issues needed to be addressed Quote Link to comment Share on other sites More sharing options...
Buckmaster7600 Posted July 4, 2016 Share Posted July 4, 2016 What kind of failures did you see? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Bowguy 1 Posted July 4, 2016 Share Posted July 4, 2016 Unable to get string to lock in. These were new bows w no excess rail lube or grease clogging trigger mechanism. This seems the main issue. Quote Link to comment Share on other sites More sharing options...
Buckmaster7600 Posted July 5, 2016 Share Posted July 5, 2016 Hmmm, in my research before purchasing mine I didn't come across any of those issues,hopefully they have gotten it figured out. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Bowguy 1 Posted July 5, 2016 Share Posted July 5, 2016 As I said nothing scientific. Just got to the point where I was expecting issues, remember they only need to shoot 3 good arrows n get 5 arrows to get that done. It's only 20 yards n should be easy n only take 3. The worst day ever 3 guys were down to 1 crossbow n we let em share just to finish test. They were brand new. That isn't only occasion it was fairly common. I believe the finish was coming off quite a few n they discontinued them a bit to fix that issue so maybe they handled both. They gotta know what the issues were Quote Link to comment Share on other sites More sharing options...
slickrockpack Posted July 27, 2016 Share Posted July 27, 2016 On 11/16/2015 at 2:40 PM, jjb4900 said: Transportation of Firearms A person may not transport or possess a shotgun, rifle or crossbow in or on a motor vehicle unless the firearm is unloaded in both chamber and magazine or the crossbow is unloaded or taken down. A loaded firearm may be carried or possessed in a motorboat while legally hunting migratory game birds. A muzzleloader is considered unloaded when the cap is off the nipple, the primer is removed, the primer powder is removed from the flintlock pan, or the battery is not in an electric-fired muzzleloader. A crossbow is considered unloaded when it is uncocked. A crossbow is considered taken down when the limbs have been removed from the stock, securely fastened in a case, or locked in a trunk. you are correct!!! damn. I was going to bring some guns when we go east and maybe hunt in Vermont NY and MA but the hell with it, I'll end up in jail. we never unload guns here. I'm getting a great education on the crossbows from you all, thank you very much! I'm narrowing my choices down. Quote Link to comment Share on other sites More sharing options...
jjb4900 Posted July 27, 2016 Share Posted July 27, 2016 21 minutes ago, slickrockpack said: damn. I was going to bring some guns when we go east and maybe hunt in Vermont NY and MA but the hell with it, I'll end up in jail. we never unload guns here. I'm getting a great education on the crossbows from you all, thank you very much! I'm narrowing my choices down. wouldn't it be easier to just unload the guns as opposed to cancelling you trip plans? 1 Quote Link to comment Share on other sites More sharing options...
slickrockpack Posted July 27, 2016 Share Posted July 27, 2016 thanks JJB for the idea of other options, I have to go, I don't have to bring guns or hunt. I don't think I'm going to bother. I'm thinking bite the bullet go, get it done, get out. Quote Link to comment Share on other sites More sharing options...
fasteddie Posted July 28, 2016 Share Posted July 28, 2016 I don't own a crossbow but have a question . Instead of spending money on any discharge bolts , couldn't one just cut and modify a wooden dowel to serve the same purpose ? Would something like that work ? It would be pretty inexpensive . Quote Link to comment Share on other sites More sharing options...
jjb4900 Posted July 28, 2016 Share Posted July 28, 2016 2 minutes ago, fasteddie said: I don't own a crossbow but have a question . Instead of spending money on any discharge bolts , couldn't one just cut and modify a wooden dowel to serve the same purpose ? Would something like that work ? It would be pretty inexpensive . I'd be afraid of it splintering or shattering, I'd rather waste a bolt.....would you shoot a dowel out of your compound bow? Quote Link to comment Share on other sites More sharing options...
fasteddie Posted July 28, 2016 Share Posted July 28, 2016 2 minutes ago, jjb4900 said: I'd be afraid of it splintering or shattering, I'd rather waste a bolt.....would you shoot a dowel out of your compound bow? Isn't an Oxford shaft a dowel ? What is the difference ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.