mowin Posted December 12, 2018 Author Share Posted December 12, 2018 3 hours ago, goosifer said: That's strange. I had a similar experience zeroing in my scope. Any idea why the first shot is so far off relative to the second and third shot? Heats up the barrel? At the range on Monday, after a handfull of shots, I was close to dialed in at 50 yards (just 1/2"-3/4" low), and then the shots starting going low by about 3-4". I adjusted a few clicks up and called it a day. I'm comfortable that I'm within an inch or so of true aim. There will be lot's of other factors that come into play in the field at this point. I'm thinking the clean barrel is throwing the shot. Once fouled, it shot more consistent. Highly doubtful it was the barrel heating up as it was only in the 20's, and I was shooting with another guy and we were alternating shots. Barrel had plenty of time to cool down. 1 Quote Link to comment Share on other sites More sharing options...
goosifer Posted December 12, 2018 Share Posted December 12, 2018 Now I'm thinking I shouldn't have cleaned my barrel so we'll after sighting in. We'll see.... Quote Link to comment Share on other sites More sharing options...
nyslowhand Posted December 12, 2018 Share Posted December 12, 2018 OP, you'd do yourself a favor if you searched & went to a strictly ML site, Then look for threads about your specific ML rifle and what loads others have had success with!! Most ML'ers are super finicky about what powder, charge &/or sabots work best. JMO, I'd be looking at the scope as a potential issue also. There's a 1000X different scenarios about getting a 2nd shot with a ML. JMO, maybe 90+% of the time it's the 1st shot out of a cleaned & cold barrel that you'll want "on the mark"! 1 Quote Link to comment Share on other sites More sharing options...
Buckmaster7600 Posted December 12, 2018 Share Posted December 12, 2018 I’ve got 3 muzzleloaders that I use and every one shoots the same load under 1.5” 3 shot group with no cleaning in between. 84grains of blackthorn 209 by weightBarnes TSX 270gn .451 bulletHarvestor sabot .451 sabotI’ve been using this load for about 5 years have yet to have a deer die out of sight. Shoots extremely consistent. “Clean, dirty, cold , warm etc”. I have tried loads that shot better groups but never found anything to be this forgiving and consistent. I have tried a lot of loads powders, bullets and sabots and my conclusion is if wouldn’t shoot pellets if someone gave me a life supply and if someone gave me a lifetime supply of power belts I’d drill holes in them and use them as sinkers. Pellets “777 and shockey’s” are too inconsistent in weight and both create the burn ring making loading more difficult. Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
The_Real_TCIII Posted December 12, 2018 Share Posted December 12, 2018 I use the Shockey pellets and my fifth loads almost as easy as the first and cleanup is a snap, I’m sticking with them. Triple Seven was a different story Sent from my iPhone using Tapatalk Pro 1 Quote Link to comment Share on other sites More sharing options...
Jeremy K Posted December 12, 2018 Share Posted December 12, 2018 11 hours ago, mowin said: I guess I'm in the school of thought that it's easier to just drop two pills down to tube than measure every load. That snd the two previous ML I've owned shot very well with two pills, so this one should too. I know your not new to all this but I'll post it anyhow in case a new guy comes across it . The powder is easy to measure at home and brought to the field in those nifty tubes ,just pull a tube and dump it in . 3 Quote Link to comment Share on other sites More sharing options...
wildcat junkie Posted December 12, 2018 Share Posted December 12, 2018 11 hours ago, mowin said: I guess I'm in the school of thought that it's easier to just drop two pills down to tube than measure every load. That snd the two previous ML I've owned shot very well with two pills, so this one should too. I would be willing to bet I could reload my flintlock from the bag with traditional accoutrements and granulated black powder as fast or faster than you could load an inline using pellets. About 20 seconds between aimed shots, perhaps a few seconds slower with a percussion rifle. Before you discount that possibility realize that the people that used the original traditional MLs had over 100 years to perfect loading techniques. 1 Quote Link to comment Share on other sites More sharing options...
goosifer Posted December 12, 2018 Share Posted December 12, 2018 Sooooo, 777 pellets are bad? Inferior to powder? Quote Link to comment Share on other sites More sharing options...
sbuff Posted December 12, 2018 Share Posted December 12, 2018 2 hours ago, Buckmaster7600 said: I’ve got 3 muzzleloaders that I use and every one shoots the same load under 1.5” 3 shot group with no cleaning in between. 84grains of blackthorn 209 by weight Barnes TSX 270gn .451 bullet Harvestor sabot .451 sabot I’ve been using this load for about 5 years have yet to have a deer die out of sight. Shoots extremely consistent. “Clean, dirty, cold , warm etc”. I have tried loads that shot better groups but never found anything to be this forgiving and consistent. I have tried a lot of loads powders, bullets and sabots and my conclusion is if wouldn’t shoot pellets if someone gave me a life supply and if someone gave me a lifetime supply of power belts I’d drill holes in them and use them as sinkers. Pellets “777 and shockey’s” are too inconsistent in weight and both create the burn ring making loading more difficult. Sent from my iPhone using Tapatalk X2, ditch the pellets and power belts Quote Link to comment Share on other sites More sharing options...
Jeremy K Posted December 12, 2018 Share Posted December 12, 2018 4 minutes ago, goosifer said: Sooooo, 777 pellets are bad? Inferior to powder? You'll never go back to 777 1 Quote Link to comment Share on other sites More sharing options...
Buckmaster7600 Posted December 12, 2018 Share Posted December 12, 2018 Sooooo, 777 pellets are bad? Inferior to powder?Like most everything they were the best there was for a while but there are now far better options. Obviously if it worked before it will still work today but I’ll never go back!Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
mowin Posted December 12, 2018 Author Share Posted December 12, 2018 31 minutes ago, wildcat junkie said: I would be willing to bet I could reload my flintlock from the bag with traditional accoutrements and granulated black powder as fast or faster than you could load an inline using pellets. About 20 seconds between aimed shots, perhaps a few seconds slower with a percussion rifle. Before you discount that possibility realize that the people that used the original traditional MLs had over 100 years to perfect loading techniques. I'm not discounting the fact that loose powder has been used for yrs, and very successfully. And I realize there are speed loaders I can load up and bring in the field. I do that now with the pellets. I guess I've used pellets successfully for yrs, and like the ease of use. I really don't have the time to work up a load with loose powder. I've got it dialed in to where I'm happy with it. Last two shots were almost touching at 100 yrds. Quote Link to comment Share on other sites More sharing options...
Elmo Posted December 24, 2018 Share Posted December 24, 2018 2 pellets of 777 powder/ CCI primers, 250 grain Thompson Center Shockwaves. Quote Link to comment Share on other sites More sharing options...
Core Posted August 23, 2019 Share Posted August 23, 2019 Thread bump time CVA Wolf, 4 X 30 grain 777 pellets (I got them for almost free), 250 gr Shockwave. Thing is wicked accurate. Out to 100 yards if I miss it's entirely my fault, not the gun's. I clean the bore after every single shot when training. Fouling the barrel for accuracy as somebody mentioned above is merely an academic exercise. You can't leave the gun that way and the first shot is the only one that matters. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.