phantom Posted December 5, 2021 Share Posted December 5, 2021 (edited) I leave my gun the way they are in storage, i dont dry fire them to relax the firepin sping never had a problem I literally have guns that I haven't shot for 15 20 years and they go boom all the same when I pull the trigger .Did i get lucky or depends on the firearm . Edited December 5, 2021 by phantom 1 Quote Link to comment Share on other sites More sharing options...
Daveboone Posted December 5, 2021 Share Posted December 5, 2021 All of my percussion and flintlocks I lower the hammer to release the spring tension, and also on my bolts...which I can close the bolt with the trigger held back, so the firing pin is not cocked ( Mauser/Mauser clones). My hammer fired guns...winchesters, falling block, Marlins..the same. My centerfire revolvers I would never store cocked...even if unloaded, but in my mind a handgun is useless if it isnt loaded, so regardless the hammer is lowered. Of course, rimfires you do not want to dry fire, and probably modern centerfires in general it isnt necessary but you can harmlessly dry fire them to do the same. Quote Link to comment Share on other sites More sharing options...
wolc123 Posted December 5, 2021 Share Posted December 5, 2021 There is no difference because the springs used on all firing pins are designed within the elastic limits throughout their installed travel limits. Quote Link to comment Share on other sites More sharing options...
Grouse Posted December 5, 2021 Share Posted December 5, 2021 I bought a used Kimber .22 Hunter off a man who said it would misfire a lot. He used to empty it and close the bolt but never released the trigger. Kimber fixed it and said the spring was weak. 1 Quote Link to comment Share on other sites More sharing options...
Gobbler Chaser Posted December 6, 2021 Share Posted December 6, 2021 Always uncocked. I always lower the bucket or implement on my tractors for the same reason. 2 Quote Link to comment Share on other sites More sharing options...
luberhill Posted December 6, 2021 Share Posted December 6, 2021 3 minutes ago, Gobbler Chaser said: Always uncocked. I always lower the bucket or implement on my tractors for the same reason. ??? Spring operated bucket Quote Link to comment Share on other sites More sharing options...
Gobbler Chaser Posted December 6, 2021 Share Posted December 6, 2021 3 minutes ago, luberhill said: ??? Spring operated bucket Me on the Hoyt Clagwell. Spring loaded bucket was off in this pic 1 1 Quote Link to comment Share on other sites More sharing options...
Nytracker Posted December 6, 2021 Share Posted December 6, 2021 (edited) All guns in a safe unloaded uncocked. Home defense guns in biometric safes .. my glock is locked cocked and ready to rock 24/7. Oh and all loader and 3 pt attachments are lowered to the ground when not attended. Edited December 6, 2021 by Nytracker Quote Link to comment Share on other sites More sharing options...
Splitear Posted December 6, 2021 Share Posted December 6, 2021 All of mine are in a safe, unloaded and uncocked, ammunition in a separate locked cabinet. As a 4-H Tractor Safety Instructor, I'm glad to see the tractor safety pointers here Just make sure you're using your ROPS! 1 Quote Link to comment Share on other sites More sharing options...
rachunter Posted December 6, 2021 Share Posted December 6, 2021 I picked up two snap caps for the stoeger o/u 12ga. I have. I read not to leave the springs cocked on that gun. My other shotguns go in the safe cocked. There’s no reason to leave the hammer back on a lever gun. My bolts go in uncocked. None go in loaded the all for hunting. My home defense guns are loaded,cocked and ready. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.