Team Hoyt Posted February 28, 2020 Share Posted February 28, 2020 Ok guys, currently in the middle of doing a remodel of my house. We had a fireplace that we are removing and studding a wall in front of it. What's a good way to fill the opening? We will try to remove the insert. And eventually the outside chimney will be removed. Quote Link to comment Share on other sites More sharing options...
mowin Posted February 28, 2020 Share Posted February 28, 2020 I'm sure the fireplace is a good amount of support for that wall. Make sure to add studs to make up for removing the brick. I'd cap the top of the chimney, then stuff insulation in the fireplace. Maybe cut a sheet to fit the opening and seal with great stuff foam? Quote Link to comment Share on other sites More sharing options...
Moho81 Posted February 29, 2020 Share Posted February 29, 2020 Hard to tell from the pictures but basically you will remove the fireplace brick and insert. Once that’s out you can frame in new 2x’s to fill the opening then insulated and drywall. You may need a small header to span 2x if they don’t go all the way to the floor. Take some pictures as you go along and I will keep checking this thread. Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
nyslowhand Posted February 29, 2020 Share Posted February 29, 2020 (edited) 27 minutes ago, Moho81 said: You may need a small header to span 2x if they don’t go all the way to the floor. ... or just install new full height studs & forget about trying to frame in the void left once FP is out. Edited February 29, 2020 by nyslowhand Quote Link to comment Share on other sites More sharing options...
Jeremy K Posted February 29, 2020 Share Posted February 29, 2020 What's behind that wall? Quote Link to comment Share on other sites More sharing options...
Moho81 Posted February 29, 2020 Share Posted February 29, 2020 ... or just install new full height studs & forget about trying to frame in the void left once FP is out.Yes that’s a good option as well depending on how it’s done. If it’s just sistering a new stud next to the old it does cut the stud cavity down by 1.5 inches allowing for more heat transfer through the wall but in reality it’s not a lot. Only talking a few cavity spaces. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
BowmanMike Posted February 29, 2020 Share Posted February 29, 2020 The fireplace should not be supporting anything,but you never know... Quote Link to comment Share on other sites More sharing options...
mlammerhirt Posted March 1, 2020 Share Posted March 1, 2020 And then that wall of the house falls down......lolSent from my moto z3 using Tapatalk Quote Link to comment Share on other sites More sharing options...
The_Real_TCIII Posted March 1, 2020 Share Posted March 1, 2020 My wife is a realtor and she loses her mind when someone removes a fireplaceSent from my iPhone using Tapatalk Pro 1 Quote Link to comment Share on other sites More sharing options...
Jeremy K Posted March 1, 2020 Share Posted March 1, 2020 28 minutes ago, The_Real_TCIII said: My wife is a realtor and she loses her mind when someone removes a fireplace Sent from my iPhone using Tapatalk Pro I would love to have a brick fireplace for special occasions Quote Link to comment Share on other sites More sharing options...
covert Posted March 2, 2020 Share Posted March 2, 2020 Great Stuff Big Gap Filler. 1 Quote Link to comment Share on other sites More sharing options...
G-Man Posted March 2, 2020 Share Posted March 2, 2020 19 hours ago, The_Real_TCIII said: My wife is a realtor and she loses her mind when someone removes a fireplace Sent from my iPhone using Tapatalk Pro Remove everyone , insurance loves to jack your rate because you have one.. and 90% of time they are unused . Quote Link to comment Share on other sites More sharing options...
G-Man Posted March 2, 2020 Share Posted March 2, 2020 I'd remove whole thing now, you prolly shifted chimney and flashing at roof line will leak ruining all your work. Remove it residue even if temporary, fix roof then fix inside. Jmo. 1 Quote Link to comment Share on other sites More sharing options...
Culvercreek hunt club Posted March 2, 2020 Share Posted March 2, 2020 8 minutes ago, G-Man said: I'd remove whole thing now, you prolly shifted chimney and flashing at roof line will leak ruining all your work. Remove it residue even if temporary, fix roof then fix inside. Jmo. Agreed. It is never going to be easier than right now. Quote Link to comment Share on other sites More sharing options...
Team Hoyt Posted March 2, 2020 Author Share Posted March 2, 2020 Yeah I removed it to be level with the plank wall. It already leaks, so any day now my roofing guy is removing it below the roof line. Figure I'm studding a new wall in since double planks have no insulation. I'm going to put 3/4" plywood on the backside just incase a brick or something comes loose when we eventually remove the whole chimney for siding. Hate for it to go thru new drywall 1 Quote Link to comment Share on other sites More sharing options...
DDT Posted March 2, 2020 Share Posted March 2, 2020 I had a heatilator fireplace that my father built in 1976. The dampner assembly rotted out. I replaced it with a pellet stove. Best heat ever. Quote Link to comment Share on other sites More sharing options...
helmut in the bush Posted March 2, 2020 Share Posted March 2, 2020 What's the blue stuff on the boards? Quote Link to comment Share on other sites More sharing options...
Team Hoyt Posted March 2, 2020 Author Share Posted March 2, 2020 1 hour ago, helmut in the bush said: What's the blue stuff on the boards? Old paper Quote Link to comment Share on other sites More sharing options...
Team Hoyt Posted March 6, 2020 Author Share Posted March 6, 2020 Its out...... FINALLY. No it's time to stud in a new wall 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.