Doc Posted September 19, 2017 Share Posted September 19, 2017 I assume that you all do some broadhead practice each year just to ensure there are no surprises. But maybe you all don't. Do you do any shooting with broadheads before the hunt? What do you use that work well for targets and do not get all chopped up right away. Do you use actual broadheads or some of the "broadhead simulators" that most manufacturers offer for sale. I use a throw-away very open-cell Styrofoam commercial target that I buy every couple of years from Walmart. I also set aside a couple of actual broadheads for the final testing and practicing. Quote Link to comment Share on other sites More sharing options...
Swamp_bucks Posted September 19, 2017 Share Posted September 19, 2017 I use the practice head to get my arrows narrowed down to which ones fly the best from 10-30yrds in a foam target. Once i have that figured out ill shoot the best 3 grouped arrows with real bh to decide the order they sit in my quiver. I always tend to have one that just flies the best. 1 Quote Link to comment Share on other sites More sharing options...
Jeremy K Posted September 19, 2017 Share Posted September 19, 2017 I bought 10 brand new muzzy for 20 dollars on AT , i sacrificed one as a target tip. 1 Quote Link to comment Share on other sites More sharing options...
BowmanMike Posted September 19, 2017 Share Posted September 19, 2017 I have a practice muzzy tip and one real one i used for targets and a few that went through a deer. I will practice with all of them this week. I have a black hole target that holds up decent for 29.99 Quote Link to comment Share on other sites More sharing options...
genesee_mohican Posted September 19, 2017 Share Posted September 19, 2017 To go out with a bow and arrow for game without first testing and practicing with the broadhead's that you'll be using, would be a big mistake. We put all that money into our bows and equipment and the time spent preparing to hunt and the end result will come down to one shot. I think most of us learned by reading or hearing from other hunters how broadheads can fly much differently than our field points and clue us in to any tuning or form problems. I shoot muzzy 3 blades and just use the actual head and put one in with my other practice arrows and shoot the blades quite a bit each year before the season to gain confidence. I have an old foam block that I've had for 10 years, but the center is pretty hosed out from broadheads. Last year I bought a yellojacket one at wallmart to test my crossbow broad heads. 2 Quote Link to comment Share on other sites More sharing options...
rob-c Posted September 19, 2017 Share Posted September 19, 2017 I always sacrafice 2 broadheads to shoot in my target, the very best broadhead target I have found is the rinehart 18-1. You can shoot the snot out of it for years and it holds up well. A good tip that helps tremendously with broadhead tuning is a arrow roller. I have found even top tier arrow shafts will have a few that are not straight and wobble on the spinner. 1 Quote Link to comment Share on other sites More sharing options...
growalot Posted September 19, 2017 Share Posted September 19, 2017 I use dull replaceable or one G4. I won't shoot replaceable blades more than once in hunting Quote Link to comment Share on other sites More sharing options...
Taylormike Posted September 19, 2017 Share Posted September 19, 2017 3 hours ago, Jeremy K said: I bought 10 brand new muzzy for 20 dollars on AT , i sacrificed one as a target tip. I do the same. I use last years Muzzy's and only shoot actual broadheads. I'll sacrifice a target everytime to replicate the real thing. I have never been a fan of using field tips of practice broadheads, it leaves too much doubt for me. 1 Quote Link to comment Share on other sites More sharing options...
Rebel Darling Posted September 19, 2017 Share Posted September 19, 2017 Like rob-c, I use the Rinehart 18 in 1 target. I've had it for two years, and still have the majority of the targets left for use. It's been worth the money. I use Montec G5 practice heads exclusively (no field tips), and Montec G5 CS broad heads when hunting. Quote Link to comment Share on other sites More sharing options...
Buckmaster7600 Posted September 19, 2017 Share Posted September 19, 2017 I use dulled slick tricks.Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Jeremy K Posted September 19, 2017 Share Posted September 19, 2017 Do you guys continue to practice with broadheads or just determine if they shoot like field tips ? My muzzy shoot the same as my field tips so I just continue to shoot field tips to save my block. 1 Quote Link to comment Share on other sites More sharing options...
BowmanMike Posted September 19, 2017 Share Posted September 19, 2017 Once i determine they fly the same I go back to field tips mostly... 2 Quote Link to comment Share on other sites More sharing options...
OtiscoPaul Posted September 19, 2017 Share Posted September 19, 2017 I've been using 1 of my Stricklands as target head for over a week and it has not been phased. I only shoot 1 BH arrow per session into a 3D deer and it is always the first in order to simulate the shot that counts. 1 Quote Link to comment Share on other sites More sharing options...
WNYBuckHunter Posted September 19, 2017 Share Posted September 19, 2017 I shoot a practice head a few times just to make sure they are flying the same and then I go back to field points for practice. 1 Quote Link to comment Share on other sites More sharing options...
Hock3y24 Posted September 20, 2017 Share Posted September 20, 2017 i have 2 heads dedicated to practice. I tuned my bow and now them an FP are identical 20-30-40. will shoot a few the 30th again to be assured before i go out in the morning. Quote Link to comment Share on other sites More sharing options...
The_Real_TCIII Posted September 20, 2017 Share Posted September 20, 2017 I practice/tune with Montecs but hunt with mechs Quote Link to comment Share on other sites More sharing options...
BizCT Posted September 20, 2017 Share Posted September 20, 2017 20 hours ago, WNYBuckHunter said: I shoot a practice head a few times just to make sure they are flying the same and then I go back to field points for practice. same. I sacrifice 1 BH as the dull/practice one. Quote Link to comment Share on other sites More sharing options...
moog5050 Posted September 20, 2017 Share Posted September 20, 2017 Yep, one practice head and only a few shots to confirm accuracy on an old Rinehart. I shoot enough bareshafts to know usually before a BH ever flies that they will have the same POI. Quote Link to comment Share on other sites More sharing options...
WNYBuckHunter Posted September 20, 2017 Share Posted September 20, 2017 2 hours ago, Biz-R-OWorld said: same. I sacrifice 1 BH as the dull/practice one. I bought a practice head or it came with the pack, I don't remember which, so I didn't sacrifice anything. Quote Link to comment Share on other sites More sharing options...
BizCT Posted September 20, 2017 Share Posted September 20, 2017 11 minutes ago, WNYBuckHunter said: I bought a practice head or it came with the pack, I don't remember which, so I didn't sacrifice anything. Oh, interesting. I just "declared" 1 out of the 4-pack of SlickTrick's as my practice/target one. 1 Quote Link to comment Share on other sites More sharing options...
Core Posted September 20, 2017 Share Posted September 20, 2017 (edited) My range has a broadhead pit with some layered foam. I won't be bothering with them this year. I use the cheap broadheads from Walmart (mechanical) and cannot discern them hitting any differently than my field tips, so I am content they hit where they need to. I will confirm that on the crossbow as that is new. As mentioned, mechanicals: I designate one of my mechanicals a practice tip and I wrap it with twine and glue so that it won't open in the target, so I can repeat the shot. I have tested out to 50 yards and if I had to bet my life on it, maybe it hits a bit lower (the wrapped twine head is less aerodynamic, so this would be expected), but I trust they hit close enough that I don't bother adjusting anything. Super-gluing one closed would work well, too. I do weigh my broadheads and use a collar if necessary to match weights across the board. Truly they are all so close I'm not sure I ever have needed a collar. Edited September 20, 2017 by Core Quote Link to comment Share on other sites More sharing options...
The_Real_TCIII Posted September 20, 2017 Share Posted September 20, 2017 I used the CE mechs from Walmart for years, I loved them. They stopped making the ones I liked Quote Link to comment Share on other sites More sharing options...
OtiscoPaul Posted September 20, 2017 Share Posted September 20, 2017 I'm trying some different vane combos out quick and once I've sorted that out in the next day or so I will stop shooting FP's and multi-arrow sessions altogether. From about the 23rd on it will be 1 BH into 3D no more than 2 sessions/day right through to Christmas. 1 Quote Link to comment Share on other sites More sharing options...
Nomad Posted September 20, 2017 Share Posted September 20, 2017 One head rotated on the 4 arrows in my quiver . I shoot at my old Block that has sat outside for years . Once I see that all a ok, back to FP . 1 Quote Link to comment Share on other sites More sharing options...
OtiscoPaul Posted September 23, 2017 Share Posted September 23, 2017 I've been using this head about 2 weeks, like new: Started my BH arrow rotation today, also marking up my arrows. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.