wooly Posted April 29, 2013 Share Posted April 29, 2013 Well, I finally got around to wrapping up the euro of my last dead buck find. My last hike I grabbed an old rough cut plank from an old abandoned stand site and brought it home for my plaque. One knotty section I really liked in this board that I really hoped I could make it work with what I was doing. Nothing fancy here. I just cut my shape with a jigsaw, sanded the snot out of it, and sprayed it with a good coat of Krylon semi-gloss satin finish. Here you can see the wood grain around the knot I was after. It looks like this hunk o' lumber was made for this skull. Since I wanted to do some sort of raised table mount display I needed to add some feet. I used a couple of antlers me and Red cut off a dead buck this winter while shed hunting and they worked out great! For now I just have them Super-Glued on, but I'll have to set a couple screws through the front even though it's pretty solid. Then I cut some pieces from an old bicycle tire tube and glued them on the antler tips and the front edge of the plaque so it doesn't slide all over the place. Here's a look from behind.. That's all she wrote! I gotta putty the nail hole in the front of it and drill the legs, but here's the finished product for the most part! Total cost of $7 for the can of clear coat and tube of glue. 3 Quote Link to comment Share on other sites More sharing options...
Deerthug Posted April 29, 2013 Share Posted April 29, 2013 Nice job! 1 Quote Link to comment Share on other sites More sharing options...
Pav2704 Posted April 29, 2013 Share Posted April 29, 2013 Wooly... The mount looks great! I'm not sure if it was mentioned on the previous thread but any idea how big he is? 1 Quote Link to comment Share on other sites More sharing options...
wooly Posted April 29, 2013 Author Share Posted April 29, 2013 (edited) Thanks guys! Not sure what he would score Pav. Only measurements I took are 19" spread and 10pts..... gotta be close to 190" with that info,lol His right side is real weak. Edited April 29, 2013 by wooly 1 Quote Link to comment Share on other sites More sharing options...
Culvercreek hunt club Posted April 29, 2013 Share Posted April 29, 2013 Thanks guys! Not sure what he would score Pav. Only measurements I took are 19" spread and 10pts..... gotta be close to 190" with that info,lol His right side is real weak. Exactly. 10 x19= 190 1 Quote Link to comment Share on other sites More sharing options...
G-Man Posted April 29, 2013 Share Posted April 29, 2013 nice job! but don't you round up..200in at least.... 1 Quote Link to comment Share on other sites More sharing options...
wooly Posted April 29, 2013 Author Share Posted April 29, 2013 nice job! but don't you round up..200in at least.... Easily 200" if he hadn't broke off that g4.., but I don't want Biz running back to another site with this so we'll stick with 190,lol 1 Quote Link to comment Share on other sites More sharing options...
fasteddie Posted April 29, 2013 Share Posted April 29, 2013 Nice job ! 1 Quote Link to comment Share on other sites More sharing options...
WNYBuckHunter Posted April 29, 2013 Share Posted April 29, 2013 Looks great wooly! 1 Quote Link to comment Share on other sites More sharing options...
Red Posted April 29, 2013 Share Posted April 29, 2013 Very good job it looks great. I love the plaque 2 Quote Link to comment Share on other sites More sharing options...
tuckersdaddy Posted April 29, 2013 Share Posted April 29, 2013 very impressive! nice work! 1 Quote Link to comment Share on other sites More sharing options...
ny hunter Posted April 29, 2013 Share Posted April 29, 2013 Nice job I like the wood great job.I would use bigger legs to hold up that 200+ rack...LOL 1 Quote Link to comment Share on other sites More sharing options...
Five Seasons Posted April 29, 2013 Share Posted April 29, 2013 i really like the mount and idea, but I'm not sure I'm feeling the antlers on the back. seems like they're "wasted" there. just my opinion and it's your mount so who cares what I think? haha. congrats 1 Quote Link to comment Share on other sites More sharing options...
Water Rat Posted May 2, 2013 Share Posted May 2, 2013 I like how the grain of the wood plague outlines the shape of the skull......great job ! 1 Quote Link to comment Share on other sites More sharing options...
chiefbkt Posted May 15, 2013 Share Posted May 15, 2013 Looks awesome! Nice job! 1 Quote Link to comment Share on other sites More sharing options...
GreeneHunter Posted May 19, 2013 Share Posted May 19, 2013 Looks like a fine job ! 1 Quote Link to comment Share on other sites More sharing options...
covert Posted May 19, 2013 Share Posted May 19, 2013 I bet you a bit of heat shrink tubing would probably work too. 1 Quote Link to comment Share on other sites More sharing options...
wooly Posted May 19, 2013 Author Share Posted May 19, 2013 I bet you a bit of heat shrink tubing would probably work too. ....but then I'd have to call it the $8 euro! Quote Link to comment Share on other sites More sharing options...
covert Posted May 19, 2013 Share Posted May 19, 2013 ....but then I'd have to call it the $8 euro! I could give you a couple little pieces, just drive out and get them... but then I guess it'd become a $28 Euro. Quote Link to comment Share on other sites More sharing options...
josephmrtn Posted May 20, 2013 Share Posted May 20, 2013 Looks great!!! 1 Quote Link to comment Share on other sites More sharing options...
chiefbkt Posted May 20, 2013 Share Posted May 20, 2013 I'm sure you could make quite a business out of that...who wouldn't want a $7 euro mount? Quote Link to comment Share on other sites More sharing options...
bowaholic Posted May 25, 2013 Share Posted May 25, 2013 I do a lot of Euros for myself, family and friends and I never thought about using smaller antlers to make a stand! I'll have to try that some time!! 1 Quote Link to comment Share on other sites More sharing options...
First-light Posted May 25, 2013 Share Posted May 25, 2013 Nice Wooly! 1 Quote Link to comment Share on other sites More sharing options...
TR19 Posted September 30, 2013 Share Posted September 30, 2013 Awesome looking euro!! & I really like the price. Quote Link to comment Share on other sites More sharing options...
NYbuck50 Posted September 30, 2013 Share Posted September 30, 2013 very nice, what did you use to get the skull cleaned? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.